[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better] [#2 updated it a little more to make it smoother to accept filament] An easy print to enable you to attac

This is a remix of the original design by user Dlarsen. All thanks to him. This remix is for those who simply want to hang the filament holder on the side of the machine without the need to use doub

Spool Arm for side mounting the original spool holder  It is designed to screw directly into the left support beam of the printer, for extra stability - other spool holders that float right next to t

I didn't like the side spool holder with 90º degree, with ptfe bowden tubes, etc. Also didn't like the extenders to work along with the AMS because it interfer with poop.  I create a simple stupid s

Description  I've printed a few similar designs and wanted something with more support and tighter tolerances.  This utilises the top right case screw for stability, has a shorter spool than others a

The X1C Mount Rotatable Spool Holder allows you to use a “608ZZ Bearing Rotatable For Filament Spool Holder” on your Bambu Lab X1C.   The Spool Holder is standard on most Creality Printers.  Using the

Created an adapter so that I could use my already printed filler spool holder on the side mounted spool holder V2

Bobbin holder simple and functional and easy to print. An alternative to the standard spool holder. With this holder, the roll is also placed a little further from the printer housing and thus grindi

Spool holder spacer for the Bambu Lab X1 Carbon 3D printer! This simple accessory ensures smooth spool unwinding during printing and eliminates friction issues with the Bowden tube and the AMS connect

Update III 11-19-22:  Added a remaining filament measurement marks. These .2kg marks match the positions that Bambu Lab has on their spools. Even so, these are estimates at best.  Added to the follow

Side frame spool holder bracket for P1P.

Remixed to narrow the depth to 100mm, so it fits behind the printer when pushed up against the wall with the external spool holder attached. I included a STEP file that can also be printed via Bamb

Filament Clip for Bambu Lab spool holder, which help to prevent the filament tangle on spool, and also help to eliminate the last few cm of filament to break by the forced filament on spool holder ori

*****This is a work in progress - I am still testing the fit and finish of the Spool Arm - Left Rear.stl file***** I wanted to see if I could create a spool holder that would sit above the P1P in cas

Desktop Caddy to store extra build plates, alcohol, glue stick, and some tools. Bambu Labs Glue stick: https://tinyurl.com/BambuStick 99% IPA: https://amzn.to/3zPxyIu Hex Scraper: https://tinyurl.c

Allows you to have it aginst a wall and swapping filament without moving the printer. I had a problem with some filament rolls I had, not fitting on the Bambu Lab X1C spool holder. Couldn't find anyt

I have combined the best features (in my opinion) of the three previous remixes. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Ba

I need the spool mounted alongside the backplane of the printer, so I have remixed the nice design fom BC. In fact only the spool-roller was untouched, the mount itself has been redesigned. It should

Remixed geometry from ttoadd's spool extender, credits to them: https://www.printables.com/model/338553-bambu-x1x1c-spool-extender Extends the spool holder out to allow for the AMS to stay plugged i

Description Remixed geometry from ttoadd's spool extender, credits to them: https://www.printables.com/model/338553-bambu-x1x1c-spool-extender Extends the spool holder out to allow for the AMS to s

Smoother  spool holder for the Bambu, the supplied one wasn't very smooth , half empty rolls don't rotate very well.  Twist and click end cap to stop the roll falling off.  Endcap assembly needs gluin

Remix of Bambu spool holder by ImShogun. https://www.thingiverse.com/thing:5664696 Quicker print, with wider edges, and less material.

Move your Bambu Labs printer spool holder from the back of the printer to a free standing spool holder that you can more easily access by placing it to the side. I simply added feet to this great f

The original Bambu Lab spool holder is such a pretty piece of metal I couldn't bear to put it away in a drawer forever since it goes to the worst possible place on the machine…  So, I gave it some fe

Bambu P1P bearing side filament holder. Made for Vision cover! Please remove 2 screws to plexiglass, see attached picture! Requires : 2pcs x 608ZZ bearings. or printed bearings : Optimal 608 Beari

This works great with    trutheframe's spool roller https://www.printables.com/model/278580-bambu-lab-spool-roller and guppyk's bearings Thingiverse: https://www.thingiverse.com/thing:4821342  

This is a spool holder to allow the Protopasta filament rolls to fit into the bambu labs AMS.  I remove the cardboard pieces on the outside of the protopasta roll and press these on each side one at a

Now the spool holder and the filament guide can be removed when they're not needed. You don't need support for the base. But for the spool holder and the filament guide, support is needed, please fol