Vision is a high visibility enclosure for the Bambu Lab P1P featuring magnetic sides (3 mm PC panels) and the ability...

Please read the Description. This is a P1P Mod for a printable enclosure. I used the official BambuLab side panels.

Give the BambuLab A1 Mini a housing that is perfectly matched to its size.  The lid provides a convenient guide for the Bowden tubes, while the magnetic door is easy to attach and remove.    Features

This enclosure features acrylic side panels and possibility to showcase your P1P in 2 colors. I chose orange to match my current setup :)  It uses around 700-800g of filament in total. Please use bri

-Insert laiton : https://www.amazon.fr/ruthex-Insert-filet%C3%A9-100-pi%C3%A8ces/dp/B09ZHSGHXD/ref=sr_1_10?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3LL3ZCH50ARSD&keywords=insert%2Bm3&qid=167663

This project is a proposal for the "P1P's contest": #ThangsBambuContest This "bambu style" enclosure is based on this P1P 3D model (https://www.printables.com/fr/model/347484-bambu-lab-p1p-frame-3d-t

A minimalistic enclosure for the Bambu Lab P1P. It is designed to print with little material, fast, little to no supports and keep most of the original features of the case accessible with a possible

An enclosure for the xtouch touch screen interface by xperiments. Fits over the P1P/S controls, gives access to both.

enclosure for P1P #ThangsBambuContest

A new low profile version #2 incoming soon with better LED placement and more versatile printing with customization options coming very soon    Slider version now live and available Test prints have

This is a remix of suit (Bambu Lab P1P "Minimal" Enclosure + Door)

LunchBox is an air scrubber that uses activated carbon and HEPA filters and supports 120mm or 4020 fans and 5015 blowers

Rahmen für die Scheiben der bekannten ARC Einhausung für den P1P

My remix xtouch enclosure for Bambu Lab P1P &P1S includes an optimized micro SD Card slot and pen holder. A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments

small remix of vision enclosure ,connected pieces together for easier printing ,enable supports to get a good base

A self-created model based on the designs of the two "remixed" models, which is compatible with the P1P Vision enclosure

Bambu Lab P1P Riser with Vent and LED for ARC Enclosure. In my project I'm using WLED with SP511E driver and MQTT connectivity through Home Assistant to control colors of LED strip, for eg. red for EM

Print the P1P sliding vent top enclosure in multicolor without an AMS

V2 of my original P1P shell: https://www.printables.com/model/512672-bambu-lab-p1p-shell

Glass Top Riser with adjustable ventilation that allows for COB LEDs to be installed along with a TPU Light Shield

Made entirely by me using the most basic cad program available... lol

it is an accessory to the model: https://www.printables.com/cs/model/549740-bambu-lab-p1p-hws-armor-modpla

V2 Bambu Side Spool Holder for P1P "Vision" enclosure

I made a remix of the Bambu Lab P1P full printable enclosure mod

wanted to add pegboard side panel like the ones on Bambu's website. So i replicated the pegboard design onto the dxf cutout that the minimal shell had for the left side panel. I then imported it into

Poop Chute for Bambu Lab P1P with ARC enclosure. Height of chute is calculated with 10mm washer antivibration mat. Additional file is 8mm lower for those without antivibration mat. Used 3 magnets for

I took the side panel logo and door/top handle for the Bambu P1P ARC enclosure and remixed the Raspberry Pi logo for it.

A mod for Bambu Lab P1P "Vision" Enclosure

The content is too long and has been truncated A minimalistic enclosure for the Bambu Lab P1P. It is designed to print with little material, fast, little to no supports and keep most of the original f

This is an enclosure for the Bambu printers. although I like the internal camera of the x1c, I can't always tell what's going on with the side view, and with this, I can see a view from up top with th

These ducts allow you to cool the A1 electronics and more safely enclose the printer.

Bambu Lab P1P ARC Enclosure Front door top seal to mitigate the rattling noise when printing.

In my project I'm using 15x4,5x3 magnets.

I remixed one of the plexiglass side to add holes to 120mm fan to temperature control.

I sligtly changed the design of V2 Bambu Side Spool Holder X1 and P1P ARC , now it fits the P1P “Vision” enclosure . Hints: No supports needed “Vision” enclosure rear acrylic plate thickness should be

Slider version now live and available Test prints have been successful and are now good to go. If you encounter any issues please let me know!   still working on the minor accessories to match th

A spacer for the lid of the ARC Bambu Lab P1P Enclosure so that it remains open.

Glass Top Riser with adjustable vents to suit Bambulab X1 and P1 Series Printers. The Frame is designed to be able to stick up to 10mm wide COB LED Strip around the inside edge. The TPU Light Shield o

A simple side spool holder for Bambu Lab printers and ARC enclosure. One printed part and ptfe tube combo.

Modified Sliding Vent Glass Top Enclosure with ESP8266 and WS2812 LED Strip.   Forked from ktothestank 's design and thanks for his good design. I modified the rear left part only based on his (N

If you measure twice and cut once unlike me, you can build this enclosure with 1x 24"x36" sheet of clear polycarbonate, 1 plate of parts totaling approx. 100 grams of PLA, a few m3 nuts and flathead h

A magnetic plate for full retro enclosing your P1P with an already printed original Bambu Lab enclosure model.

Abdeckung für die Magnete der Tür des Vision Gehäuses

6月11日，上传了支持安装排气扇的背板！ On June 11th, the back bezel panel that supports the installation of exhaust fans was uploaded! Disassemble the electrical compartment cover of the P1P, there is a reserved fan

It is 5mm higher, so it grips the upper panel better!

With these hinges you will be able to easily remove the door by just lifting it up

Poop bin to fit snug onto a P1P which has an ARC enclosure.

A plug for the printable Bambu enclosure

This enclosure features acrylic side panels and possibility to showcase your P1P in 2 colors. I chose orange to match my current setup :) It uses around 700-800g of filament in total. Please use brim