BASIC is a simple and easy enclosure for the Bambulab A1 mini desktop printer

LunchBox is an air scrubber that uses activated carbon and HEPA filters and supports 120mm or 4020 fans and 5015 blowers

This project is a proposal for the "P1P's contest": #ThangsBambuContest This "bambu style" enclosure is based on this P1P 3D model (https://www.printables.com/fr/model/347484-bambu-lab-p1p-frame-3d-t

This is a remix of suit (Bambu Lab P1P "Minimal" Enclosure + Door)

Glass Top Riser with adjustable ventilation that allows for COB LEDs to be installed along with a TPU Light Shield

enclosure for P1P #ThangsBambuContest

These ducts allow you to cool the A1 electronics and more safely enclose the printer.

Please read the Description. This is a P1P Mod for a printable enclosure. I used the official BambuLab side panels.

A new low profile version #2 incoming soon with better LED placement and more versatile printing with customization options coming very soon    Slider version now live and available Test prints have

Rahmen für die Scheiben der bekannten ARC Einhausung für den P1P

These cooling ducts mount under the A1 and create a duct that passes from the vents on the sides of the printer to the vents on the underside, allowing you to pull air across the passively-cooled elec

it is an accessory to the model: https://www.printables.com/cs/model/549740-bambu-lab-p1p-hws-armor-modpla

Vision is a high visibility enclosure for the Bambu Lab P1P featuring magnetic sides (3 mm PC panels) and the ability...

wanted a pegboard design for the minimal shell i was printing. So i made this. It's a work in progress

My remix xtouch enclosure for Bambu Lab P1P &P1S includes an optimized micro SD Card slot and pen holder. A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments

Enclosure Corner Bracket fits in A1 mini. 2 at a time. 0.28

V2 of my original P1P shell: https://www.printables.com/model/512672-bambu-lab-p1p-shell

Glass Top Riser with adjustable vents to suit Bambulab X1 and P1 Series Printers. The Frame is designed to be able to stick up to 10mm wide COB LED Strip around the inside edge. The TPU Light Shield o

A minimalistic enclosure for the Bambu Lab P1P. It is designed to print with little material, fast, little to no supports and keep most of the original features of the case accessible with a possible

I sligtly changed the design of V2 Bambu Side Spool Holder X1 and P1P ARC , now it fits the P1P “Vision” enclosure . Hints: No supports needed “Vision” enclosure rear acrylic plate thickness should be

Made entirely by me using the most basic cad program available... lol

-Insert laiton : https://www.amazon.fr/ruthex-Insert-filet%C3%A9-100-pi%C3%A8ces/dp/B09ZHSGHXD/ref=sr_1_10?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3LL3ZCH50ARSD&keywords=insert%2Bm3&qid=167663

In my project I'm using 15x4,5x3 magnets.

small remix of vision enclosure ,connected pieces together for easier printing ,enable supports to get a good base

The content is too long and has been truncated A minimalistic enclosure for the Bambu Lab P1P. It is designed to print with little material, fast, little to no supports and keep most of the original f

Super Mario Block Enclosure Mod for Bambulab P1P 3D Printer | Carcasa bloque interrogación Super Mario para Bambulab P1P

Poop Chute for Bambu Lab P1P with ARC enclosure. Height of chute is calculated with 10mm washer antivibration mat. Additional file is 8mm lower for those without antivibration mat. Used 3 magnets for

Bambulab Logo side window, double sheet with magnetic positioning for P1 series enclosure.   This is a flexible window to ensure chamber temperature and an on-deman full enclosed setup. I've prin

A mod for Bambu Lab P1P "Vision" Enclosure

A simple side spool holder for Bambu Lab printers and ARC enclosure. One printed part and ptfe tube combo.

Stylish enclosure for your printer 😁

This is a remix of a very good model for cooling the A1. !!! VERY IMPORTANT !!! !!! THIS IS THE ONLY WAY TO ENCLOSE Bambu lab A1. !!! I added two 4010 fans, integrated in the duct pipes. the one will

A plug for the printable Bambu enclosure

I made a remix of the Bambu Lab P1P full printable enclosure mod

Modified Sliding Vent Glass Top Enclosure with ESP8266 and WS2812 LED Strip.

Print the P1P sliding vent top enclosure in multicolor without an AMS

This enclosure features acrylic side panels and possibility to showcase your P1P in 2 colors. I chose orange to match my current setup :) It uses around 700-800g of filament in total. Please use brim

Modified rear plate for the XTouch Enclosure by @TeachingTech

Remix for easy printing, in two parts / Remix für einfaches Drucken, in zwei Teilen

I took the side panel logo and door/top handle for the Bambu P1P ARC enclosure and remixed the Raspberry Pi logo for it.

A self-created model based on the designs of the two "remixed" models, which is compatible with the P1P Vision enclosure

V2 Bambu Side Spool Holder for P1P "Vision" enclosure

I made a remix of the Bambu Lab P1P full printable enclosure mod -you can put an acrylic or plexiglass pane in the door -I created a frame with a hinge and installed it on my P1P -the bolts from the o

Bambu Lab P1P Enclosure (frustration-free)

6月11日，上传了支持安装排气扇的背板！ On June 11th, the back bezel panel that supports the installation of exhaust fans was uploaded! Disassemble the electrical compartment cover of the P1P, there is a reserved fan

Bambu Lab P1P Vision Enclosure Rear Middle Panel with Fan Hole (92mm)

This is an enclosure for the Bambu printers. although I like the internal camera of the x1c, I can't always tell what's going on with the side view, and with this, I can see a view from up top with th

wanted to add pegboard side panel like the ones on Bambu's website. So i replicated the pegboard design onto the dxf cutout that the minimal shell had for the left side panel. I then imported it into

A hot shoe mount [for universal phone holder] that works with the Arc Enclosure with the Lid Riser addition.

Same as the original, but shortened on the front side by 30mm to clear the P1P chamber camera.