tracking pixel
Kazi T

Mr. Rockboto: the Benchmark Bot

by
Kazi Toad
Follow
Follow
Remix Model
Kazi Toad
Kazi Toad
|
Image 1 of 2
Mr. Rockboto: the Benchmark Bot 3d model
Kazi Toad
Kazi Toad
|
Image 1 of 2
Mr. Rockboto: the Benchmark Bot 3d model
2D
3D
Makes
Mr. Rockboto: the Benchmark Bot 3d model
Mr. Rockboto: the Benchmark Bot 3d model
This model is restricted by licensing terms. 

These files are for Personal Use Only. If you would like a Commercial License to sell prints made from these designs, please join me on Patreon: https://www.patreon.com/kazitoad

Mr. Rockboto is not only a fun print-in-place figure but it is also a very useful calibration tool.

He has 14 functional joints with different orientations, couplings, and tolerances. The tolerances range from 0.2 - 0.5mm and allow you to test the minimum clearances your printer can produce and still achieve print-in-place movement.

Each limb is labeled with the tolerances of their joints and all other joints have a 0.3mm tolerance. It might take a little (just a little) bit of force to break them free any more and you risk breaking the robot.

Link to the original Benchmark Bot: https://thangs.com/Kazi%20Toad/Benchmark%20Bot-55105

Print Settings:

No support! No brim!

The point of the Benchmark Bot is to find the best parameters to make it function, therefore it is difficult to recommend any settings.

That being said, I used the following parameters: 0.4mm nozzle, 0.2mm layer height, PLA, 3 walls, 4 top/bottom layers, 10% infill.


54 Likes281 DownloadsMarch 14, 2022


54 Likes281 DownloadsMarch 14, 2022
This model is restricted by licensing terms.