A unique vase for flowers.

Scaling / size

• Upscaling (100% +): as big as you want
• Regular size (100%): 168 x 165 x 216 mm – has a wall thickness of 2 mm
• Smaller (80%): 134 x 132 x 173 mm – has a wall thickness of 1.6 mm
• Minimum size (60%): 100 x 99 x 130 mm – has a wall thickness of 1.2 mm
• Everything smaller than that is not tested but probably possible

Print settings Material usage (100% scale): 270g Print time: (100% scale): 22h

Material usage (80% scale):160g Print time: (80% scale): 13h

Material usage (60% scale): 80g Print time: (60% scale): 7h

Material: PLA Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none

Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.