This is a collaborative project between Lofted Goods and me.

A highly detailed planter based on a 3d scan of an ash tree (Fraxinus excelsior). It comes with a hidden drip tray that perfectly locks into the surface texture.

The planter comes in two sizes with two versions each. One with the wall holder and one without for desktop usage. The tray and pot have a little indentation on the front to give you orientation help when inserting the pot into the planter.

Wall mounting You can either screw or glue the planter onto your wall. The holder has compartments for command strips. The screw holes are 5 mm in diameter. For the US #10-12 x 1-1/4 in anchors and screws are the best option. If you choose to print the big wall mounted version and want to mount it with screws, make sure to print the screw insert, too.

Print settings Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none