Bring the stadium to you home! Perfect gift and home decor for fans of the team.

See the PDF included with your download for printing tips.

Check out our complete collection of cities, states, national parks, and more!

Steps:

- Import the STL to your slicer. Versions are available with and without elevated field lines.
- Scale the X or Y dimension to the desired size with 'Uniform scale' checked.
- Slice and print!
- Display framed or unframed. Set it on a shelf, tabletop, or hang it on a wall.

About the models
Each model is designed and optimized from Micropolitan's 5+ years of experience developing and selling 3D prints of iconic locations worldwide. The models are designed by hand, assisted with a combination of data and reference imagery. We use LiDAR and refine the architecture, block by block, using digital sculpting tools and satellite imagery. The models are then optimized for detail preservation while keeping the file size manageable for everyday computers.

This 3D model was developed with reference data sources and satellite imagery from OpenStreetMap contributors and USGS 3DEP.

Northwestern Wildcats - Ryan Field

Northwestern Wildcats - Ryan Field_Field.stl

Wisconsin Badgers - Camp Randall Stadium

Wisconsin Badgers - Camp Randall Stadium_Field.stl

Penn State Nittany Lions - Beaver Stadium

Penn State Nittany Lions - Beaver Stadium_Field.stl

Purdue Boilermakers - Ross-Ade Stadium

Purdue Boilermakers - Ross-Ade Stadium_Field.stl

Illinois Fighting Illini - Memorial Stadium

Illinois Fighting Illini - Memorial Stadium_Flat.stl

Print your world!

250+ Cities, Stadiums, and Terrains

The most detailed models, designed for 3D printing.

New models every week!

[Join our Discord community](https://discord.gg/t8dFKRqWEe)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

A Demon Owl sculpt

Pre-Supported .lys and .stl files for resin printing included

Demon Owl (Pre-Supported)

Demon_Owl.stl

A bust of Scorpion from Mortal Kombat game series.

Pre-Supported .lys and .stl files for resin printing included.

Scorpion bust (Pre-Supported)

bust.stl

Pre-Supported .lys and .stl files for resin printing included

Skull & Cones (Pre-Supported)

icecream.stl

The Krampus is a horned anthropomorphic figure who, in the Central and Eastern Alpine folkloric tradition, is said to accompany Saint Nicholas on visits to children during the night of 5 December.

Pre-supported .lys and .stl files are included for resin printing

The model will need supports for FDM printing

Krampus bust (Pre-Supported)

A werewolf bust

Pre-Supported .lys and .stl files for resin printing included
The model needs supports for FDM printing 

Werewolf bust (Pre-Supported

**Fotis Mint Studios**

Digital Sculptor and Artist.

[My links](https://linktr.ee/fotismint)
 


**Print-In-Place, No Supports, Articulating Fidget Toy**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

The perfect Christmas gift for your Lawful Good friends

**Other Models:**

[Revised Bony Basilisk Snap-Flex 2.0](https://than.gs/m/1140952?affiliateCode=mimetics)

[Baby Amethyst Dragon](https://than.gs/m/1119531?affiliateCode=mimetics)

[Virgo Dragon](https://than.gs/m/1137615?affiliateCode=mimetics)


**This model is for personal use only.**  
If you would like to sell prints of these models, **Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)**


Paladin Dragon - Articulated Dragon 

PaladinDragon_BambuMulticolor_Mimetics3D.3mf

**Print-In-Place, No Supports, Articulating Fidget Toy**
  
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

Check out another holiday flexi model here:
[Flexi Elf](https://than.gs/m/1181658?affiliateCode=mimetics)

**This Santa Hat Snappy Cat comes with both Ornament and regular versions.**

Snappy Cat is back to make your Halloween a little more fun.  Featuring the Snap-Flex 2.0 joint, this cat is great for fidgeting.

If the joint locks a little too tightly, wiggle the locked joint side-to-side to loosen it up a bit.

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows it to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
The Snap-Flex 2.0 joint eliminates the need for mulitple tolerances of these models.  The updated geometry allows improves the hold and durability while also making it easier to lock/unlock the joint by giving it a bit of a wiggle.  If the joint is too tight at first, just wiggle the locked segments side-to-side to loosen it up a bit.  Over time, as you naturally snap and unsnap the joints, they should relax to the **appropriate** level of hold.

**Personal Use:**
This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Santa Hat SnappyCat Ornament -  Snap-Flex 2.0 Articulated Fidget Toy

SantaHatSnappyCat_BambuMulticolor_Mimetics3D.3mf

**Print-In-Place, No Supports, Articulating Fidget Toy**
   
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

Check out another flexi model here:
[Cloaked Skeleton](https://than.gs/m/1179484?affiliateCode=mimetics)

**And for a Holiday Snap-Flex Toy and/or Ornament Check out:**
[Santa Hat SnappyCat](https://than.gs/m/1181672?affiliateCode=mimetics)

Bambu Multi-color 3MF and STL

Flexi Elf  - Articulated Flexi Fidget Toy

FlexiElf_BambuMulticolor_Mimetics3D.3mf

**Print-In-Place, No Supports, Articulating Fidget Toy**
   
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

Check out another flexi model here:
[Flexi Elf](https://than.gs/m/1181658?affiliateCode=mimetics)

**And for a Holiday Snap-Flex Toy or Ornament Check out:**
[Santa Hat SnappyCat](https://than.gs/m/1181672?affiliateCode=mimetics)

Bambu Multi-color 3MF and STL

Cloaked Skeleton - Articulated Flexi Fidget Toy

CloakedSkeleton_BambuMulticolor_Mimetics3D.3mf

**Print-In-Place, No Supports, Articulating Fidget Toy**
  
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

Check out another spooky Snap-Flex model here:
[Grim Reaper Revisited](https://than.gs/m/1146750?affiliateCode=mimetics)


Snappy Cat is back to make your Halloween a little more fun.  Featuring the Snap-Flex 2.0 joint, this cat is great for fidgeting.

If the joint locks a little too tightly, wiggle the locked joint side-to-side to loosen it up a bit.

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows it to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
The Snap-Flex 2.0 joint eliminates the need for mulitple tolerances of these models.  The updated geometry allows improves the hold and durability while also making it easier to lock/unlock the joint by giving it a bit of a wiggle.  If the joint is too tight at first, just wiggle the locked segments side-to-side to loosen it up a bit.  Over time, as you naturally snap and unsnap the joints, they should relax to the **appropriate** level of hold.

**Personal Use:**
This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Witch Hat Snappy Cat 2024 - Snap-Flex 2.0 Articulated Fidget Toy

WitchSnappyCat_2024_BambuMulticolor_Mimetics3D.3mf

**[Sell prints with a Mimetics3D Commercial License](https://than.gs/u/934587?plans=true)**

Thanks for stopping by and checking out my designs!

I'm designing a selection of bio-inspired, articulated, and/or cursed models.

My Snap-Flex models incorporate a special joint that allows you to *SNAP* the segments into place to lock them and *SNAP* them back out to flex freely. Fantastic for fidgeting and ASMR fun.

If you're willing to give me a bit of feedback, please [let me know how you like the models here](https://forms.gle/9BHK3hUYTE9V3XVZ7)



Most wins

Micropolitan