**Rocket Ship Phone Stand**

This cute little rocket ship phone stand uses a **Gear Mechanism** to put the FUN in functional. This stand looks good on a shelf, is compatible with Keychains, and even gives you something to fidget with when your phone's dead! 
What's more fun than a Rocket Ship shaped Phone Stand!?*(answer at the bottom)

**Complete with:**
- Easy Assembly!
- Files for multi material, and single material printing.
- Option for Keychain use

**Print Guide:**

- [**Use M3x15mm Screws**](https://amzn.to/3T7dQCj) if you want high durability, otherwise print pins
- Minimum 3 walls, with 25%+ cubic infill. More if you're going to sit on it, less if you're going to Space.
- Use ABS/PETG because you will leave this in a hot car. PLA if you will only use indoors.
- Pre-oriented, with supports needed on just the tip.

**Assembly:**
For each Screw/Pin hole, put a drop or two of super glue in first for a permanent fit.
1. Screw/Pin Middle Gear on to Rocket Tip 
2. Screw or Pin the 3x rocket bodies to the Tip. (Make sure Pins are pushed in all the way.)
3. Super glue Windows on Rocket Bodies
4. (if printed separately) super glue Fins on Rocket Bodies

Works great with an [iPhone](https://amzn.to/3AgYsN5). You probably need one anyways.

*A phone shaped Rocket Ship Stand!


Rocket Ship Phone Stand

Rocket Stand - Multi Material Parts.3mf

This hook is designed to give you 4 places to hang whatever you want!

Simply add two to each bi-fold door in your home for 8 more places to hang your coats, umbrellas, leashes, and backpacks!

Prints in place with no supports.
Use 6x walls to ensure strength
Print in PETG or ABS for longevity, PLA if you dont have heat waves, and TPU if you want your things on the floor.

Jankmart Loves you.

Bi-Fold Door Hook

bifold door hook v1.3mf

Every (3D Print) Farmer needs a Hoe. 

This Hoe is compatible with [Plastic Razor Blades](https://amzn.to/4c0PLDH) so you dont scratch your print bed. Unlike all the other 3D print bed scrapers out there.

Download comes with both double and single ended hoes. 

Print on it's side with Tree Supports, ~6 walls so you wind up with a solid hoe.

Bed Hoe

Bed Hoes.3mf

This articulated laptop stand fits perfectly in your backpack! 
Features print in place hinges so you can fold it up right off the build plate! Just make sure your filament is tuned prefectly. 

Print Guide:

- Minimum 3 walls, with 25%+ cubic infill. More if your laptop is built like a desktop.
- Use ABS/PETG because you will leave this in a hot car. PLA if you will only use indoors.
- Pre-oriented, with no supports needed.

*largest piece does not fit on anything smaller than 256x256mm build plates. (working on a version that fits smaller printers)

Works great with a [MacBook Pro](https://amzn.to/3zReGMD). You probably need one anyways.


Laptop Stand - Collapsible

Laptop Stand v16.3mf

**Looks** like a Pen, **Clicks** like a Pen, **Tastes** like a Pen! 

**_It's literally a Pen Holder!_**

You can hide your favorite pens in the secret compartment, and annoy your friends with the clicking action. Multiple spring strengths provided to let you tune the force to your liking.

Print Guide:
- Springs must be in PETG with tree supports. Use 6-8 walls to eliminate infill.
- Main Body, Clip, and Center require supports.
- Print main body with 2 walls, and 8-10% Cubic infill to save filament, or max it out for the heaviest pen imaginable. 

Clicky Pen Holder

Alignment pin x12.3mf

There's something for everyone at **Jankmart**!

We blur the lines between 3D Printing, and off-the shelf product. 

Access the entire Jankmart library with a membership!

Don't forget to leave a free **follow** or **like** :)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

This is a "Medium" Command Strip Mount that specifically uses [3M Medium Picture Hanging Command Strips](https://geni.us/odrk) and creates an 8 mm offset from the surface.

If your Tiles are smaller than a 6x6, then use the [Small Command Strip Mounts](https://link.Multiboard.io/Offset-Snaps-Small-Command-Strip-Mounts).

This is a vertical mount that is placed on the left and right edges of your board.

This is a “Double-Sided Part A” piece, so it can be secured into place using [Dual Snaps (DS Part B)](https://than.gs/m/974162). It can also be secured using 10 mm Mid Thread Bolts.

Get the 3M Medium Command Strips here: https://geni.us/odrk (By purchasing through this referral link, I earn a commission at no extra cost to you).

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Vertical Dual Snaps (DS Part A) - Medium Command Strip Mount

Vertical Dual Snaps (DS Part A) - Medium Command Strip Mount.stl

This is a "Small" Command Strip Mount that is best suited for Multiboard Tiles that are smaller than a 6x6. They specifically use [3M Small Picture Hanging Command Strips](https://geni.us/vxs8B) and create an 8 mm offset from the surface.

If your Tiles are a 6x6 or bigger, then use the [Medium Command Strip Mounts](https://link.Multiboard.io/Offset-Snaps-Medium-Command-Strip-Mounts).

This is a vertical mount that is placed on the left and right edges of your board.

This is a “Double-Sided Part A” piece, so it can be secured into place using [Dual Snaps (DS Part B)](https://than.gs/m/974162). It can also be secured using 10 mm Mid Thread Bolts.

Get the 3M Small Command Strips here: https://geni.us/vxs8B (By purchasing through this referral link, I earn a commission at no extra cost to you).

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Vertical Dual Snaps (DS Part A) - Small Command Strip Mount

Vertical Dual Snaps (DS Part A) - Small Command Strip Mount.stl

This is a "Small" Command Strip Mount that is best suited for Multiboard Tiles that are smaller than a 6x6. They specifically use [3M Small Picture Hanging Command Strips](https://geni.us/vxs8B) and create an 8 mm offset from the surface.

If your Tiles are a 6x6 or bigger, then use the [Medium Command Strip Mounts](https://link.Multiboard.io/Offset-Snaps-Medium-Command-Strip-Mounts).

This is a horizontal mount that comes with top and bottom versions that are placed at the top or bottom edges of your board.

This is a “Double-Sided Part A” piece, so it can be secured into place using [Dual Snaps (DS Part B)](https://than.gs/m/974162). It can also be secured using 10 mm Mid Thread Bolts.

Get the 3M Small Command Strips here: https://geni.us/vxs8B (By purchasing through this referral link, I earn a commission at no extra cost to you).

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Horizontal Dual Snaps (DS Part A) - Small Command Strip Mount

Bottom - Horizontal Dual Snaps (DS Part A) - Small Command Strip Mount.stl

Top - Horizontal Dual Snaps (DS Part A) - Small Command Strip Mount.stl

This is a "Small" Command Strip Mount that is best suited for Multiboard Tiles that are smaller than a 6x6. They specifically use [3M Small Picture Hanging Command Strips](https://geni.us/vxs8B) and create an 8 mm offset from the surface.

If your Tiles are a 6x6 or bigger, then use the [Medium Command Strip Mounts](https://link.Multiboard.io/Offset-Snaps-Medium-Command-Strip-Mounts).

This is a “Double-Sided Part A” piece, so it can be secured into place using a [Quad Snap (DS Part B)](https://than.gs/m/974127). It can also be secured using 10 mm Mid Thread Bolts.

Get the 3M Small Command Strips here: https://geni.us/vxs8B (By purchasing through this referral link, I earn a commission at no extra cost to you).

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Quad Snaps (DS Part A) - Small Command Strip Mount

Quad Snaps (DS Part A) - Small Command Strip Mount.stl

This is a "Small" Command Strip Mount that is best suited for Multiboard Tiles that are smaller than a 6x6. They specifically use [3M Small Picture Hanging Command Strips](https://geni.us/vxs8B) and create an 8 mm offset from the surface.

If your Tiles are a 6x6 or bigger, then use the [Medium Command Strip Mounts](https://link.Multiboard.io/Offset-Snaps-Medium-Command-Strip-Mounts).

This is a “Double-Sided Part A” piece, so it can be secured into place using a [Single Snap (DS Part B)](https://than.gs/m/974407). It can also be secured using 10 mm Mid Thread Bolts.

This mount comes with top and bottom versions that are placed at the top or bottom corners of your board.

Get the 3M Small Command Strips here: https://geni.us/vxs8B (By purchasing through this referral link, I earn a commission at no extra cost to you).

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Single Snap (DS Part A) - Small Command Strip Mount

Bottom - Single Snap (DS Part A) - Small Command Strip Mount.stl

Top - Single Snap (DS Part A) - Small Command Strip Mount.stl

This is the home of Multiboard, a FREE "all-in-one" 3D printed storage system with 924+ parts. Explore and build the coolest, most adaptable workshop at **[multiboard.io](https://multiboard.io)**

You can also find me on YouTube, and see a whole bunch of other tutorials, choas & projects. [https://linktr.ee/keepmaking](https://linktr.ee/keepmaking)

Iron Doom bust (Pre-Supported) 

bust.stl

Deadpool is a character appearing in American comic books published by Marvel Comics. Created by Fabian Nicieza and Rob Liefeld, the character first appeared in New Mutants #98 (December 1990). In his comic book appearances, Deadpool is initially depicted as a supervillain of the New Mutants and X-Force, though later stories would portray him as an antihero. Deadpool is the alter ego of Wade Wilson, a disfigured Canadian mercenary with superhuman regenerative healing abilities. He is known for his tendency to joke incessantly and break the fourth wall for humorous effect.

Deadpool bust (Pre-Supported)

A crow skull 
Sculpt commission by Charro Zuck

Supports needed for FDM printing
Pre-supported .lys and .stl files included for resin printing

Crow Skull (Pre-Supported)

Crow_Skull.stl

"You must be the Tarnished. I am Sir Ansbach. Formerly in service to Lord Mohg. But now, like you, guided by Miquella."

Sir Ansbach is an NPC in Elden Ring. Sir Ansbach is a former servant of Mohg, Lord of Blood, but is now part of the group that follows Miquella through the Realm of Shadow. Sir Ansbach is an NPC exclusive to Shadow of the Erdtree and does not appear in the base game.


Sir Ansbach bust - Elden Ring (Pre-Supported)

Ansbach_bust.stl

YoRHa No.2 Type-B, generally known simply as 2B, is one of the main protagonists and player characters of the video game NieR: Automata as well in the anime adaptation NieR: Automata Ver1.1a, She is a female android created by an organization known as YoRHa who was sent to earth to fight against the robotic lifeforms known as the Machines who have invaded Earth and drove humanity off of the planet.

2B Nier Automata (Pre Supported)

**Fotis Mint Studios**

Digital Sculptor and Artist.
 


Here is the model for Bubba Bear.

Bubba Bear is having a little down time in his rocking cot, Giving his parents and Uncle Barry a bit of a break, do you have space for Bubba?

I hope you enjoy, 

Thanks

Bugman

If you like what I am doing please consider Tipping or buying me a coffee.

https://buymeacoffee.com/bugman140

Bubba Bear

Bubba Bear 2.stl

Here is the model for Bunny Bear.

Bunny Bear is a good Friend of Barry, and like his friend he seems to just want to be your friend too, and maybe hide a few eggs, do you have space for Bunny? maybe he can keep Barry Company.

I hope you enjoy, 

Thanks

Bugman

If you like what I am doing please consider Tipping or buying me a coffee.

https://www.buymeacoffee.com/bugman140

Bunny Bear

Bunny Bear.stl

Here is the model for Momma Bear.

Momma Bear is here with her little one and is good Friends with Barry, and like her friend she seems to just want to be your friend too, do you have space for Momma? maybe they can keep Barry Company.

I hope you enjoy, 

Thanks

Bugman

If you like what I am doing please consider Tipping or buying me a coffee.

https://www.buymeacoffee.com/bugman140

Momma Bear

Momma Bear.stl

In Honour of St Patricks Day Here is the Model for my Twisted 4 Leaf Clover,
this is printed in 4 separate sections to allow up to 4 different colours to be used.

Each section is slightly different this time so i have numbered the base 1 through 4 to help you keep them in the right order

I printed mine in Fillamentum Grass Green and Louminus Green and they came out Perfectly

This Model is also Vase Mode Compatible if you want to print them to hold some Goodies

Enjoy and Happy St Patricks

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffeeBuy me a coffee

Twisted 4 Leaf Clover - Single Extruder

petal_4_-_twisted_4_leaf_clover.stl

Here is the model for Harry Bear.

Harry “The Bear Who Lived” is a good Friend of Barry,  and like his friend he seems to just want to be your friend too, do you have space for Harry? maybe he can keep Barry Company.

I hope you enjoy, 

Thanks

Bugman

If you like what I am doing please consider Tipping or buying me a coffee.

https://www.buymeacoffee.com/bugman140

Most recent

jankmart