IMPORTANT! SUPPORTS ARE REQUIRED. A brim is also recommended due to the nature of the support layout. Supports are required on the arms to help the socket-joint to print properly.
This model is based on the Warden from Minecraft; it has simple ball-jointing on the arms, legs, and head. The joints don't move up or down very well due to the blocky nature of the design and serve only for rotation.
There is a full-colour version, which I have tried to optimise the flush volumes of to reduce waste, but it is still a filament-eater. I have provided a flat colour option too, if you'd rather paint him yourself.
If you'd rather not use supports on the main body, simply lower the body into the plate before printing. Doing this tells the slicer to remove the back ribs/spine, and any supports that were needed before will be removed.
The 3MF was made in Bambu Studio, so all paint data will not show up when imported into other slicers. If you only want the support data, I recommend the PRUSA 3MF.
This file covers personal, non-commercial use; do not share or redistribute without attribution. Do not sell the files or prints of the files. Remixing is allowed but again providing attribution is required. If you want to sell prints of this model, please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards