Boring zippers no more! Don't get spooked by this one! 💀

**Items you need:**
- 2 x “4mm x 30cm” paracord.
- *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
- 2 x “12mm” wiggly eyes.
- Super glue (for the eyes, mouth and magnets).

*If you do not have magnets, I have included a [3D-printed Connector](https://thangs.com/designer/zipperrific/3d-model/Zipper%20Pull%20-%20Connector-1123107).


**Suggested print settings for the Main Body:**
- Layer height 0.2mm.
- Infill 30%.
- Position the print in a way that the joining face is facing downwards.
- No supports are needed.
 

**Suggested print settings for Mouth:**
- Layer height 0.2mm.
- Infill 15%.
- Brim: Width 2mm (optional).
-- Brim Separation Gap: 0.2mm.
- Position the print in a way that the chamfered side is facing upwards.
- No supports are needed.

**ASSEMBLY**
Affix the mouth to the main body with the chamfered side facing downwards.

_NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise._

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

Zipper Pull - Skull Face

skull-L-thewhatbrandsg.stl

skull-mouth-thewhatbrandsg.stl

skull-R-thewhatbrandsg.stl

connector-thewhatbrandsg.stl

Boring zippers no more! Expanding the Zipper Pull collection - this one is for all dog lovers! 🐶🦴

**Items you need:**
- 2 x “4mm x 30cm” paracord.
- 4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
 
**Suggested print settings:**
- Layer height 0.2mm.
- Infill 30%.
- Position the print in a way that the joining face is facing downwards.
- No supports are needed.

_NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise._

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

Zipper Pull - Bone

bone-L-thewhatbrandsg.stl

bone-R-chipped-thewhatbrandsg.stl

Boring zippers no more! Ghost from Pac Man!

**Items you need:**
- 2 x “4mm x 30cm” paracord.
- *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
- *2 x “12mm” wiggly eyes.
- Super glue (for the eyes and magnets).

*If you do not have magnets, I have included a [3D-printed Connector](https://thangs.com/designer/zipperrific/3d-model/Zipper%20Pull%20-%20Connector-1123107).

**Suggested print settings:**
- Layer height 0.2mm.
- Infill 30%.
- Position the print in a way that the joining face is facing downwards.
- No supports are needed.

_NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise._

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

Zipper Pull - Ghost (Pac Man)

pacghost-L-v2-zipperrific.stl

pacghost-R-v2-zipperrific.stl

Boring zippers no more! Grab a slice! It's chessylicious!

**Items you need:**
- 2 x “4mm x 30cm” paracord.
- *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
- Super glue (for the magnets).

*If you do not have magnets, I have included a [3D-printed Connector](https://thangs.com/designer/zipperrific/3d-model/Zipper%20Pull%20-%20Connector-1123107).

**Suggested print settings:**
- Layer height 0.2mm.
- Infill 30%.
- Position the print in a way that the joining face is facing downwards.
- No supports are needed.

_NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise._

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

Zipper Pull - Cheese

cheese-L-zipperrific.stl

cheese-R-zipperrific.stl

Adding a touch of personality to your zippers. From cute and quirky designs to sleek and sophisticated styles, we've got something to suit every taste and personality.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

zipperrific

Achievements

Seedling

Debutant