Remix of Pill cutter by MacuBO for ~1 15/16" Utility Razor Blade

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5306286.

Great original design, but I didn't have blades that fit. I found that my other remix for ~1.5" blades tended to flex and bend. So, I decided to give it another go with some utility razors I had on hand.

I understand that not all utility razors are the same, make sure you check the size to see if the ones you have will fit.

Small bits (~ 5mm per side) of cut filament is used as an alignment tool for ensuring a proper gluing. The razor just fits right in the slot. Prior to gluing, slide the razor into the provided space before gluing the halves together to ensure a snug, secure fit.

I've found that with careful gluing, and ensuring the razor seats properly, I could remove the blade and put it back into place with just enough effort, so potentially the blade is replaceable.

It's not as sexy as the original, but it works! The MacuBo design is definitely the best pill cutter I've tried - other cutters tend to crush or cut wonky on occasion.

Hope this remix helps someone else.