Multiboard ScrewDriver Bracket
1.7K downloads · 2 years ago · I decided to design a bracket to hold various size screwdrivers on the multiboard. I'm sure there a
I decided to design a bracket to hold various size screwdrivers on the multiboard. I'm sure there are others out there. This one works for me and I thought I'd share.
Based on Keep Makings Multiboard designs by Zack Freedman.
#Multiboard #Multiboardmix
.2mm layer height 3 bottom, 3 top, 3 walls / perimeters. Infill can be 15 or 20% No supports Bracket in photo is eSun PLA+
Multiboard ScrewDriver Bracket
1.7K downloads · 2 years ago in and
25mm Smaller Mid Thread - Flat Head - Long Bolt
Multiboard AMS Shelf Bracket
Bambu AMS Shelf & Plate Holder for Multiboard Heavy Insert Bracket
Remix of Multiboard Ultimate Screwdriver Holder!
Multiboard Precision Screwdriver Holder
iLevar Electric Screwdriver Multiboard Holder
Ryobi PCG002 Battery Charger Bracket for Multiboard
Screwdriver Bracket for Stanley STHT0-62148
LC-E6E Charger Bracket Multiboard
Multiboard Screwdriver Tool Organizer
Multiboard screwdrivers holders
Multiboard Screwdriver Holder
Multiboard Ultimate Screwdriver Holder!
Multiboard - LTT Screwdriver Holder
Multiple Precision Screwdriver Mount – Multiboard
.jpeg&w=3840&q=75)
Multiboard Screwdriver organizer.stl
Multiboard Bracket for Creality Build Plate Scraper
6x6 Multiboard Tile Bracket
Ryobi P117 Battery Charger Bracket for Multiboard
Sorry, just seeing this now... I'll look into this. Thanks for commenting about it. It fit fine for me. But, I will correct it as best I can.
Just printed it, but recognized, that it's VERY hard - near to impossible to mount it into the multiboard. Measuring another, perfect fitting part turned out, that the dimensions of the octagon of your design is ~0,2-0,3mm wider (13,33 vs. ~13,57/13,54/13,63 - printed in the same batch). I'll try to file it a litte bit smaller, but modifying the design would be usefull - especially I really like the design.
I spent some time looking into this. I compared my model to the step files provided by Keep Making and the width of the octagon is 13,5 mm which is what my designs are. I reviewed my Fusion 360 design and imported an stl and measured it as well. I'm not sure what the issue is. Sorry, but I can't find an error. I even measured all three of the octogons, which are replicated parts in the design. Again, sorry it took me so long to reply.