Ender 3 clone Bigtreetech SKR 2.0 & SKR Mini E3 V2.0 case

Cases for Bigtreetech SKR v2 and Raspberry Pi 3, assembled dimensions for between extrusions are depth 125mm x width 250mm x height 40mm Both cases set up for 40x10 fan and sliding lids,

The standard version has provisions for a 5mm diameter USB cable to loop back on itself and run inside the cases from SKR 2 to Raspberry Pi 3 (you will need to cut the small dividers between the cable holes and the USB ports and fit the cable before mounting the SKR 2 and Raspberry Pi 3)

The blanked versions have a 0.8mm wall on the holes between the two cases to stop airflow so could be cut out if needed