This design was the first test to try an idea that had occurred to us for creating a set of mandalas.
What we were looking for was to find a design that allowed us to play with color changes and give a beautiful effect to the mandala. We wanted to try with wood filaments to make it resemble how a mandala is constructed with laser cutting, but the wood filaments we used gave us so many problems with the extruder that we decided to use a gradient filament instead.
In the end, we abandoned the project of creating other designs, but if you like it, let us know in the comments, and we can create some other mandala designs.
If you want to try changing filaments, the changes will be at 2.2mm, 3.4mm and 4.4mm for the size provided.
Printing settings:
Nozzle diameter: 0.4 mm Layer height: 0.2 mm (but you can put 0.25 mm with no problem, just readjust the color changes) Perimeters: 2 Top and bottom solid layers:
All Quimicafeina designs are protected by Copyright Law. By downloading, you have no right to sell or distribute any digital files or reproductions from those files.
To get access to exclusive designs or for a commercial license to sell the physical prints of the files, you can join our thangs club or support us on patreon.