tracking pixel
Stephen  L

V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL

by

thelightspd

Follow
Follow
Remix Model
Like
thelightspd
thelightspd
Image 1 of 7
V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL 3d model
2D
3D
Makes
V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL 3d model
V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL 3d model
V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL 3d model
V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL 3d model
V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL 3d model
V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL 3d model
V8 MOTOR CAN COOLER - VERSION 3 - EASY TO PRINT AND IS FUNCTIONAL 3d model
130 Likes35 DownloadsMay 31, 2023


Well hello everyone. So I finally finished the final models. This is a long process. The V6 and V8 you see in the photos were commissioned jobs for a customer... I finally finished them today and shipped them out.

What do we have here? Well this is the #3 version of the Engine/Motor Can Cooler series. All are here on Patreon. #1 had the moving parts with a crank and Can Pistons. #2 was a V8 variant with a two piece block and oil pan. It's cool, but leaks pretty bad. So I made this.... #3... Numero Three is a V6 and a V8 variant. With no oil pan. I recommend printing HOT and slow bottom layers... 9 is a good place to start. This is an effort to reduce or eliminate leaking. Also minimal fan helps layer adhesion.

These should print on any standard machine 220 and up. The hardest parts are the "ice covers"... they print with no supports in a crazy angle. Brims are your friend. :) The Rear Handle bolt is reverse thread. This is to keep the handle up.

I REALLY hope guys and gals love this. In total this takes 1.3KG of plastic, that's everything. This series has been really fun. Let me know if you have any issues.


130 Likes35 DownloadsMay 31, 2023




130 Likes35 DownloadsMay 31, 2023