Helldivers 2 - Supply Backpack Stratagem - High Quality 3D Print Model!

THE ONLY GOOD BUG IS A DEAD BUG!

Join the front line with this high quality Helldivers 2 Supply Backpack 3D print model!

This 3D print model comes separated into STLs for easy 3d printing- has 29 pieces and 19 strap cover plates. Also includes variants of the strap covers with built in plugs, to stop them sliding on the strapping, and alternate supply boxes, which are flat plates with location pillars, to save on filament if wanted.

I've also done two variations of the main backpack pieces- the larger shell files haven't been split in two so if you have a larger printer/larger filament spools, you can save time and avoid the seam.

The model has been designed with usability in mind- there are slots and pins to allow for 38mm nylon webbing to be run as straps, and the plate covers will conceal it, while allowing flexibility. You will need 2 10mm x 78mm steel rods for the top strap connection, and sewing needle/thread to sew the strap returns back to themselves. I would also recommend some good quality epoxy glue to glue everything together for strength! If you want functional clips, you can also use 38mm webbing clips.

Please note - this is not an official replica, but I do always take care to be as accurate to in game models and references as I possibly can be! The in game model clips directly to the armour, so I took a little creative licensing and translated them as straps instead. If you do want to be as accurate as you can be, you could also use a 4 point harness under your armour and use 38mm nylon clips to clip directly to it!

You can also find more examples of my work or get in touch with me at - https://www.instagram.com/theforge_props/

Sale of my models does not include a commercial license to sell the models, prints of the models or finished props- you can get in touch via my email or on instagram if you want to discuss potential licensing terms.