Simple HDD holder (thickness 26mm) for Multiboard with tight snaps.

**Note: I highly suggest printing it on the side to give way more strength (at the expanse of using more support) to have the layer vertically instead of horizontally.**

Simple HDD 26mm Holder for Multiboard with Tight Snaps.stl

Simple 120mm Computer Fans holder for Multiboard with Tight Snaps

Simple 120mm Computer Fans Holder for Multiboard with Tight Snaps

Simple 120mm Computer Fans Holder for Multiboard with Tight Snaps.stl

SO-DIMM RAMs holder for Multiboard with Tight Snaps

Simple SO-DIMM RAMs holder for Multiboard with Tight Snaps

Simple SO-DIMM RAMs holder for Multiboard with Tight Snaps.stl

Simple RAMs holder for Multiboard with Tight Snap

Simple DDR RAMs holder for Multiboard with Tight Snaps

RAMs holder for Multiboard with Tight Snaps.stl

A simple GPU Holder to put them on your multiboard, either for decorative purpose or to have it handy.

**Tested so far with a Dual Slot GPU of 1Kg with dimension: 40.01 x 24.99 x 5.99 cm  It should work with Tri Slot, heavier GPU but be SURE to test before**

For printing, print **on the side** to get more strength (so the layers are vertical when the piece is fixed in place).

I used 25 % infill, 3 walls. You can use your slicer to cut it if your GPU is smaller.

Simple GPU Holder for Multiboard with Tight Snap

GPU Holders.stl

Simple holder for an Anker PowerPort 60W with 10 USB port with the snap mounting (https://thangs.com/designer/Keep%20Making/3d-model/Multiboard%20Snap-974295

Use support where needed.

Anker PowerPort 10 USB 60W Holder with Snap for Multiboard

Porte alimentation.stl

**/!\ NOTE: this mount hasn't been tested (yet) with something heavy as a monitor, only been tested with a (lightweight) Raspberry Pi /!\**

Quick remix of the Honeycomb Storage Wall Vesa 75x75 mount (https://www.printables.com/fr/model/670320-vesa-mount-75x75-hsw/files) to use with Multiboard (using the snap in method)

Multiboard Vesa Mount 75x75 With Snap for Multiboard

Multiboard Vesa Mount 75x75 Screw in.stl

Remix of the Honeycomb Storage Wall VESA 80 mount (https://www.printables.com/fr/model/343748-vesa-80-hsw-mount) with additional hole for some Switch / Access Point.

Multiboard Vesa Mount 80 With Weight Bearingh Directional Snap for Multiboard

Multiboard Vesa Mount 80.stl

This is a reproduction of the speaker cover for a Citroën DS19 made with FreeCAD.

The original piece is the brown one and the reproduction is the orange one (do note that the photo display an old version, printed in draft. Since then, I corrected some distance on the side and added attachment pole on the back).

Obviously, printing with something that can resist the interior of a car (PETG / ABS).

There's attachment pole below that you may need to drill a bit if you want to screw it in place.


Speakers Cover for Citroën DS19 / Cache Haut-Parleur pour Citroën DS19

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

the_purple_mage

Achievements

Seedling

Novice Maker

Voyager

Debutant