Storage compartments for your Ziploc bags.   The sizes included are gallon, quart, sandwich, and snack.  Every part is able to be conveniently snapped together to form the perfect storage container.  Each compartment is large enough to fit a box and then some!  However, it is compact enough to fit horizontally in a standard kitchen drawer and vertical in your kitchen cabinet. 

Every part can be printed without supports. You will want to assemble them in this order: Quart, Snack, Sandwich, and Gallon last. When installing the lids the one side has a longer snap that needs to be orientated towards the other container. I printed this out of PETG, It took about 600g's to print everything. I would suggest using a mouse ear brim to make sure the corners don't warp.  

If you print my model like how it comes out don't forget to post a make!

Ziploc Storage or Dispenser 

Gallon.stl

IPhone 14 Pro case with physical buttons. The buttons have a .2mm gap on the top and bottom so they will be able to flex when pressed. I used a 95A TPU to print the case the case is a tight fix to hug the phone. I printed the model with support as well. I printed this with fuzzy skin which will give the case a nice texture but that is optional. The camera bump file i printed with ASA but you could print it with any material. You can glue the camera bump on to the case but it isn't required.    

Don't forget to upload a make! 



IPhone 14 Pro Case

Iphone 14 pro case.stl

Samsung Galaxy S23 case with physical buttons. The buttons have a .2mm gap on the top and bottom so they will be able to flex when pressed. I used a 95A TPU to print the case is meant to be a tight fix to hug the phone. I printed the model with support and fuzzy skin which will give the case a nice texture but that is optional.

Samsung Galaxy S23 Case

Samsung Galaxy S23 Case.stl

Samsung Galaxy S24+ case with physical buttons. The buttons have a .2mm gap on the top and bottom so they will be able to flex when pressed. I used a 95A TPU to print the case is meant to be a tight fix to hug the phone. I printed the model with support and fuzzy skin which will give the case a nice texture but that is optional.

Samsung Galaxy S24+ Phone Case

S24+ Case.stl

Samsung Galaxy S21+ case with physical buttons. The buttons have a .2mm gap on the top and bottom so they will be able to flex when pressed. I used a 95A TPU to print the case the case is a tight fix to hug the phone. I printed the model with support as well. I printed this with fuzzy skin which will give the case a nice texture but that is optional. 

Samsung Galaxy S21+ Phone Case

S21+ v13.stl

Desktop mail holder shaped like a envelope. I printed it in PETG and the model does require supports.  

Mail Holder

Mail Holder.stl

This is a wall mounted holder for two Oral-b toothbrush chargers. The cord passthrough is made for American electrical plug. There is a model with removal holes if you want it to be easier to remove the chargers at any point. 

Hardware used in the picture:
Plastic wall anchors
#8 x 1 x 1 1/4 screws
https://www.amazon.com/gp/product/B086ZK7RBF/ref=ewc_pr_img_1?smid=A2MPND3FB07Q7G&th=1



Oral-B Toothbrush Charger Wall Mounted Holder

Oral-B Toothbrush Charger Holder V2.stl

This Toilet paper holder can be mounted with two drywall anchors and screws. No supports are required! Make sure to orient the print so that the bottom of the hook is on the bed and the top of the hook is pointed upward.

Hardware used in the picture:
Plastic wall anchors
#8 x 1 x 1 1/4 screws
https://www.amazon.com/gp/product/B086ZK7RBF/ref=ewc_pr_img_1?smid=A2MPND3FB07Q7G&th=1



Toilet Paper Holder

Tolet Paper Holder.stl

A nice looking fruit bowl. The print will need very little supports.

Fruit Bowl

Fruit Bowl.stl

This bathroom towel holder can be mounted with two drywall anchors and screws. No supports are required! Make sure to orient the print so that the bottom of the hook is on the bed and the top of the hook is pointed upward. 

Hardware used in the picture:
Plastic wall anchors
#8 x 1 x 1 1/4 screws
https://www.amazon.com/gp/product/B086ZK7RBF/ref=ewc_pr_img_1?smid=A2MPND3FB07Q7G&th=1


Bathroom Towel Holder or Hook

Towel Holder V2.stl

The case has 6 slots for tools or whatever you would like to store in there. The model is print in place. The clearance between the two parts is 0.2mm. 

Case with print in place lid.stl

Peg Game similar to the one at cracker barrel. "IQ Tester"
"Tricky Triangle"

Peg Game

Peg Game Board.stl

Dice.stl

Phone stand with a spot for a wireless charger.

Phone stand with bult-in wireless charger.stl

Trash can with swinging lid

Trash can.stl

Swdub Plan

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Seedling

swdub98

Achievements

Novice Maker