lostintech
lostintech

Lost Factory Cube - A generalist *diagnostic* cube

by
lostintech
lostintech
Follow
stevenpoole1968
stevenpoole1968
|
|
Image 7 of 20
Lost Factory Cube - A generalist *diagnostic* cube - my bambu settings 1.5hrs - 3d model
stevenpoole1968
stevenpoole1968
|
|
Image 7 of 20
Lost Factory Cube - A generalist *diagnostic* cube - my bambu settings 1.5hrs - 3d model
2D
3D
Makes
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube - I guess I have a lot of calibrating to do.... (I knew this already but I'm sharing my shame anyway)

31 minute print
Polymaker PolyLite PLA
Modded Ender 3 Pro
 - 3d model
Lost Factory Cube - A generalist *diagnostic* cube - my bambu settings 1.5hrs - 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube - CR-10 SE, 1 hour - 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube - neat, calibrate that - 3d model
Lost Factory Cube - A generalist *diagnostic* cube - great test, clearly my dimension shifting extruder needs further adjustments - 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model
Lost Factory Cube - A generalist *diagnostic* cube - Printed in PETG :) - 3d model
Lost Factory Cube - A generalist *diagnostic* cube - Overhangs are always an issue.
Klipperized Sovol SV06  - 3d model
Lost Factory Cube - A generalist *diagnostic* cube - Layer shift on the overhang test but otherwise good. 
Klipperized Sovol SV06  - 3d model
Lost Factory Cube - A generalist *diagnostic* cube - ridges and waves on the sides. smooth rod wouldnt fit in side hole. layuer seperation slightly. unreadiable top word on bottom. sloppy text on top. ugly bolt heads. 25% of tiny bridges failed. sagging arch. wobbly gate surface. holes on top layers sometimes. light steinging. am i missing anything? 

what does it all mean though? what to prioritise? - 3d model
Lost Factory Cube - A generalist *diagnostic* cube 3d model

Lost Factory Cube - A generalist *diagnostic* cube

This cube tests for a lot of basic calibration and hardware issues on an FDM printer, all at once.

You need to print this cube:-

at 0.2mm layer height on a 0.4mm nozzle (or smaller) with 0.4-0.46 line width The screw and rod parts snap off to test in the screw holes and normal holes. There are ghosting, overhang, cooling, ovality tests among other things.

This work is licensed under a Creative Commons (4.0 International License) Attribution-NonCommercial, you may not redistribute this commercially, please link to this source. You can however show it in your videos or whatever, commercial or otherwise.


77 Likes144 DownloadsJanuary 28, 2024