tracking pixel
Simone M

Portable ventilator

by
DedalusHunter
Follow
Follow
Remix Model
DedalusHunter
DedalusHunter
|
Image 1 of 9
Portable ventilator 3d model
DedalusHunter
DedalusHunter
|
Image 1 of 9
Portable ventilator 3d model
2D
3D
Makes
Portable ventilator 3d model
Portable ventilator 3d model
Portable ventilator 3d model
Portable ventilator 3d model
Portable ventilator 3d model
Portable ventilator 3d model
Portable ventilator 3d model
Portable ventilator 3d model
Portable ventilator 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6201176.

I had a few spare motors and a switch so I decided to make a fan.

The engines used are these: https://www.amazon.it/gp/product/B07HBMQ4GF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

(They are horrible and have no torque, sooner or later I'll add a reducer to make the fan bigger)

For the rest you need some M3 10mm screws for the lids, some wire, 2 AA batteries, something conductive to connect the batteries (I used washers and 1 M3 8mm screw, but feel free to experiment)

The hole for the switch is 6mm in diameter and the groove to insert it is 8mm X 16mm.

The fan was generated using the hyperair script: https://github.com/hyperair/fan-blades

If you want to modify it, the size of the motor pin is 2mm.


2 Likes3 DownloadsSeptember 3, 2023


2 Likes3 DownloadsSeptember 3, 2023
This model is restricted by licensing terms.