Squirtle - Realistic Pokemon - 3D print STL and multicolor 3MF file
-->Get access to all our other amazing 3d prints on our SEREV3d Patreon:
-dozens of original, high quality premium stl and 3mf files with provided print settings
-painting and post processing recommendations
-multiple different versions of the models, depending on your needs
-and we also take personal requests from our members of what design they want!
- For the rights to sell the 3d prints of our designs, become a paid member on our patreon: https://www.patreon.com/SEREV3d
-->Join our Serev3D Authorized Sellers List
More info on our Serev3D website about getting our models with a discount price, commercial license, and how to get on the Authorized Sellers' List. You can take a look at the Serev3D community prints there too: https://serev3d.com/
For detailed printing & painting instructions, resources and extra info about this specific design: CLICK HERE
We're looking forward to see your awesome makes of our designs!
If you want us to give shoutouts and reposts of your makes on social media, don't forget to tag us @serev3d and use #serev3d on your posts, so we can find it and re-share it on our socials, giving you proper credit!
Also, a few good places where you can share your makes and get a good exposure:
Check out all our other amazing designs on our patreon: https://www.patreon.com/SEREV3d
- New models being released every 2-3 days
- If you wish to sell the 3d prints you make from our designs, get your Serev3d Authorized Seller Badge upon joining our paid Patreon membership we'll place your contacts of your store on our Authorized Sellers' List
PRINTING INSTRUCTIONS:
(If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version's 3mf files)
-Layer height: 0.2mm , if you want finer details you can set it to 0.16 (Also you can turn on Adaptive Layer Height and Ironing Top Surfaces, if you want less visible layer lines on the top surfaces of your print
- Wall loops: 3
- Infill: 10%, Gyroid
- Supports: On some of the versions of Squirtle in the 3mf file we added manual supports so if you load that in Bambu Studio (or Orca you are good to go, If you use another slicer:
For the one piece and multiple pieces version you can activate Auto Tree supports with a 30 degree threshold angle, TopZ distance 0.28, BottomZ distance 0.2
For the articulated version: activate MANUAL Tree supports with a 30 degree threshold angle, TopZ distance 0.28, BottomZ distance 0.2, and paint the support manually (with the paint bucket or the brush) under Squirtle's belly. The reason to only do manual supports with it, is to not let the slicer to automatically adding supports to the head attachment, because it would be extremely difficult to remove them from inside the head, and then the moving head part would not fit on the body
Estimated print time: 4-6h