Platypusaurus Rex Build-a-dragon *Commercial Version*
bysassiecat3d
Important when buying this design version: This is the commercial version of "Platypusaurus Rex Build-a-dragon". If you buy it, you will be able to 3D print and sell the prints, as many times as you want to. (Only the physical models, not the digital models/stls file!) This file is not to be sold, shared, remixed, or given to anyone else.
Make sure to use/show my autorised sellers badge when selling my models at events, on websites ect :-)
These files are not made for big companys to make in batches of more than 500 pieces at a time. If you are a company that wants to buy the right to mass produce my models, you may contact me so we can discuss this further.
I also have a Patreon, If you are interested: https://www.patreon.com/Sassiecat3d
This model is made so you can print it in parts and then put them together in a build your own dragon system.
You can make it so you have an extremely long dragon by printing a lot of the body joints, or you can give it 3 pairs of wings/arms! Its only your imagination that sets the limits.
I printed this at 400% and He's a beautiful big P-Rex!
I printed it all on my bambu A1 and a1-mini, so now everybody can make a big dragon even with a small printer!
All parts in the Build-a-dragon system can be mixed and matched between the diffrent models.
3D PRINTING SETTINGS
I used a .4mm nozzle, .2mm layer height, I use 10% infill No supports needed :-D It a fully print in place model! Make sure your printer is all set with a good calibration and retraction before printing it.