This is a 45° bend for a wooden train track. I'm Unsure of the brand

wooden train track, 45° bend

These are parts to create a linear motion devices aka a linear actuator.

Other than the printed parts you'll need:
- 2020 v-slot
- a NEMA 17 stepper motor
- pulley
- belt
- some nuts & bolts
- idler wheel
- a stepper driver or cnc shield

**🌟 Support My 3D Creations! 🌟**
If you've been enjoying my 3D models, I'd be thrilled if you could spare a moment to support my work.

Donations help me keep the creativity and filament flowing 😉
Feel like chipping in? You can buy me a virtual coffee here: ☕️ https://ko-fi.com/remcoder ☕️
Thanks a bunch for considering!


Check my other designs too:
https://makerworld.com/en/@remcoder

Linear actuator

stepper mount

Carriage

assembly

Mounting bracket to attach a fan to a v-slot bar.

fan mount for vslot

Simple fidget spinner. Add 5 skate bearings

5-spinner - fidget spinner

5-spinner

Designed a simple fidget spinner with the kids.

Fidget spinner

Designed some simple fidget spinners with the kids.

Fidget spinners

A top for the Pololu Zumo robot. Made in Tinkercad.

Zumo top

Zumo top v2.stl

Simple enclosure for a cheap PWM generator. The intent was to expose the pushbuttons. 

Enclosure for PWM generator 

PWM pulse generator case v18 top.stl

Cover for an Arduino Uno + Color shield + rgb matrix. (similar to a ColorDuino)

ColorDuino cover

A cup & saucer, designed to be printed very small. It was part of an art project.

Tiny cup & saucer

Cup & saucer v4.stl

A simple joint to connect 3 pvc tubes, 13.5mm inner diameter.

3D printable without supports if you lay the model on the chamfered corner.

3-way pvc joint

A simple joint to connect 3 pvc tubes, 13.5mm inner diameter.

3-way pvc joint v4.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3954529.

This is a simple insert with 4 compartments for the IKEA MOPPE drawers. You can fit 4 of these in a single drawer. 

Download the model for Fusion 360 here: 
https://a360.co/3aUvIHy


IKEA moppe insert (small)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4331547.

This is a simple insert for an IKEA MOPPE drawer with 4 compartments.

You can download the Fusion 360 files here:
https://a360.co/2KRmOzI

I also have a smaller one of which you can fit 4 in single drawer: https://www.thingiverse.com/thing:3954529

IKEA moppe insert

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5023688.

PSU Bracket

A quick 'n dirty u bracket for mounting a PSU to, say, a wooden board.


The dimensions of the PSU are:
- height 50mm
- width 110mm

The length of the bracket is actually 110.3 to allow for some margin. This is not needed for the height. In fact a tight fit will help fasten the PSU, leveraging the elasticity of the plastic.



PSU bracket

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2293910.

This is a simple adapter to fit a 100mm tube on a 120mm fan. My fan was actually a little smaller than 120mm so please make sure to scale it to your exact fan size. 

I have yet to print it but I will post an update soon.

fan duct 120mm to 100mm adapter

Software engineer meets 3D printing

You can buy me a virtual ☕️ here:
https://ko-fi.com/remcoder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>Software engineer meets 3D printing</p>
<p>You can buy me a virtual ☕️ here:
<a href="https://ko-fi.com/remcoder" target="_blank" rel="noopener nofollow">https://ko-fi.com/remcoder</a></p></div>