DT

Grandfather Clock Case for EC1515B and DS1302 Rotating Clock Kits

by
rebeltaz
Follow
Follow
Remix Model
Grandfather Clock Case for EC1515B and DS1302 Rotating Clock Kits 3d model
Grandfather Clock Case for EC1515B and DS1302 Rotating Clock Kits 3d model
2D
3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3949352.

I built this EC1515B clock kit several years ago and it has just sat around without a case ever since. There are other 3d printable cases out there for these clocks, but me being me, I wanted something unique. To my knowledge, no one has ever put one in a grandfather clock.

This is printed in multiple sections without supports for any component, so long as the pieces are printed in the orientation in which they are presented. I printed the pins with a brim, but if you can print these without one, I would highly suggest you forgo a brim. As small as they are, they are a pain to get off.

For assembly, you will need four 3mm nuts; four 3mm bolts, 10mm long; and eight 3mm bolts, 8mm long. Assembly is pretty straight forward. The finials are glued in place with pins. The topper is screwed to the main_face with 3mm bolts. The main_face is screwed to the central portion with 3mm bolts. The central section is glued to the base with pins. The spindles are glued in place on the main_face, aligning the corners of the spindles with the corners of the main_face. The clock itself is screwed to the main_face with 3mm x 10mm bolts and nuts. The main_face_lid is screwed in place with 3mm bolts. The finished product is right at 14" tall.


If you print this, I would really appreciate two things: 1) Please upload a [Make] and 2) It'd be awesome if you could tip me a little something for this model. I worked really hard on this one and I am pretty proud of it. If you would like to donate using bitcoin (I'd much prefer this method), you can do so via my address: 1DdWx5E86iQsVam361q3T4qMGKXdGBRCxx


NOTE Due to either a Thingiverse bug or (more likely) shadowbanning, my models no longer show up under the [Newest] listings. If you want to see more of my models, please be sure to 'follow' me. If you print this, it would really help if you'd post a 'make' so that others could find this model.


0 Likes1 DownloadsApril 26, 2022


0 Likes1 DownloadsApril 26, 2022
This model is restricted by licensing terms.