Plushie Raccoon - Articulated Raccoon

This little raccoon may be stiched up but he’s still full of life. The tail turns and he will sit pretty for you. Won’t you help mend his broken heart and become his buddy too?

Magnet file: I have included a magnet file. The magnet is within the print so there is no glue involved. The file must be paused at the layer right before the hole is sealed. For mine it was layer 24 for .20 layer height. I use Orca and on the scroll bar to the right of the code you right click and select pause, then you can add your magnet. If you are using Bambi Studio it is just like Orca to pause.

The magnet hole is 22 x 4 mm. I used a 20 x 3 mm magnet.

Printing Recommendations: .20 later height or utilize adaptive layers for a smooth finish No supports required Make sure your bed is clean, utilize glue, hair spray, or your stickum of choice

Don't forget to share your prints, I do love seeing everyone's makes.

This file is for personal use only. To sell the prints commercially you must be an active paid subscriber on Thangs or Patreon. All Rebel Alicorn Designs files are copywritten along with the 3D model or any part of the model in digital or physical format and may not be shared, transmitted, redistributed, remixed, modified, duplicated, or sold. Rebel Alicorn Designs' physical prints may not be used for any commercial use unless you obtain the commercial license provided by joining the Thangs or Patreon membership for Rebel Alicorn Designs