Membership Exclusive
These cute little carpenter bees are ready to build their new home. They come in two versions, one with a hammer and saw on a tool belt and one without. These carpenter bees also come with their hollowed-out log home. The bees can be printed in place and do not need any support. Sizing has been tested from 100% to 50% and all links work. If printing the bees smaller I suggest using a .10 layer height. The hollowed-out stump does need support on the lid only. I decided to support the entire underside, but if your printer bridges well, you may only need to support the inside rim. I did save the lid file 1% larger than the actual stump so that the lid will fit on, depending on printer settings and filament, you may need to adjust the lid size.
3D print settings: 2-3 walls 10-25% infill Print in place no supports needed This file is for personal use only. All Rebel Alicorn Designs files are copywritten along with the 3D model or any part of the model in digital or physical format and may not be shared, transmitted, redistributed, remixed, modified, duplicated, or sold.
Rebel Alicorn Designs' physical prints may not be used for any commercial use unless you obtain the commercial license provided by joining the Thangs or Patreon membership for Rebel Alicorn Designs.