Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4747941.
Quick and easy "thing" to create sub-divisions in the Yeezet screw organizers available on Amazon. Using these, I was able to get all the screw sizes I have into a single organizer. Hope u like it...
I made 2 versions, one with 2 rounded corners to put in the 4 corner compartments of the organizer, and one with square corners for all the other compartments. Both are 1mm thick.
I had initially made these 2mm thick, but came to the conclusion it was not necessary. However, I'll upload the SketchUp File in case someone wants the 2mm version.
And in case you want to try your luck with other organizers, these dividers are 40mm long, 21mm wide and 32mm high, but you can also easily modify the SketchUp file to fit your needs (or let me know if you need a specific size).
Printed on Ender 3 V2, 0.2mm layer height, 20% infill, as is (on its side for added strength), ah, and I print at 0.5mm line width (with a 0.4mm nozzle) to make stronger parts. The divider is 1mm thick so printing it with a 0.5mm line gives you the added advantage of a quick, solid print, with no infill or wasted time. No support or adhesion necessary if you print them one by one. Brim necessary if you print several at a time.
(This is actually my 2nd design. I will be uploading the first one shortly)