**Enhanced Designs Access**: As a Premium subscriber, you will receive all the benefits of the Standard plan with an upgraded access to 6 models per month, including exclusive premium models not available in the Standard plan. This includes the commercial license.

By subscribing to the Premium plan, you acknowledge and agree to all the terms stated above. Violation of these terms will result in legal accountability for any shop(s) or person(s) involved.

Premium Access

**Designs Access:** Active Subscribers will have access to up to **3 standard models** per month added to this plan. This includes but is not limited to: Swords, Whips, Pauldrons, Chainmail, Scalemail, Boots, Shields, Bows, Maces, Rings, Amulets, Crowns.

**Welcome Discount:** You will receive a 30% discount valid for all my models, including those not listed in this plan.

**Commercial License:** With active subscription you have a commercial license to legally sell 3D prints created from the designs available on the catalog. Active subscribers are licensed to sell these prints on any platform of their choice.

The digital files are NOT for resale or distribution. 

Commercial license is only given to active subscribers. If you choose to cancel your subscription, your commercial license will end at the time your access expires.

By signing up to the this plan, you acknowledge and agree to all terms stated above. Any shop(s) or person(s) who break these terms of agreement will be held legally accountable.

Standard Access

Hello fellow crafters! Excited to share my latest creation, the Antler Crown. Painstakingly designed with attention to detail, this piece embodies dedication to authenticity and quality. Perfect for cosplay, it promises to elevate any character portrayal. I hope it inspires and adds magic to your amazing projects. Keep creating wonders!

Printing Settings:
- Printer Model: Prusa i3 MK3S
- Layer Resolution: 0.2mm
- Nozzle Size: 0.4mm
- Slicing Software: PrusaSlicer
- Filament Material: PLA
- Bed Temperature: 60°C
- Nozzle Temperature: 210°C
- Supports: No
- Infill Percentage: 15%
- Brim: Recommended

Printing Information:
- Estimated Printing Time: 12 hours 30 minutes
- Print Volume: 200mm x 170mm x 145mm

Additional Information:
Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.

Regal Antler Crown 3D Print Model for Cosplay & Home Decoration

Category:

Tags: