A thinner (5mm ⌀) hook for the Multiboard.

I've printed mine out of PLA with a 0.6mm nozzle at 0.3mm layer height without any supports.

Multiboard Pegboard Hook Thin

Multiboard Pegboard Hook Thin.stl

A multiboard compatible Wera 816 R + 33 Bit Holder. The original set I bought had the Wera 816 R handle and 32 bits. This holder can hold one extra bit if needed.

I've printed mine out of PLA with a 0.6mm nozzle at 0.3mm layer height without any supports.

Multiboard Wera 816 R + 33 Bit Holder

Multiboard Wera 816 R + 33 Bit Holder.stl

A remix of the Multiboard Stubby Screwdriver Holder by j0dan (https://thangs.com/designer/j0dan/3d-model/Multiboard%20Stubby%20Screwdriver%20Holder-995930).

**Differences of the remix compared to the original**
The original design was for the Stubby (NOT KK). The Stubby KK version did not fit into the socket, so I made it a tiny bit larger.

**NOTE:**
J0dan attached the fusion file to customize the design, but for some reason I cannot link it as remix because the license forbids it. (maybe a wrong license, If not I can ofc take this one down and create an original design)

Multiboard Wera KK Stubby Holder

Multiboard Wera KK Stubby Holder.stl

A multiboard compatible adapter for the skrewdriver and bit set by Yinsan. One has to disassemble the original box and use the bit organizer in there to mount it into the adapter.

I've printed mine out of PLA with a 0.6mm nozzle at 0.3mm layer height with just one support for the top most Push-Fit part. The model should be orientated vertically so that the first Push fit touches the print plate → View the screenshot (:

Multiboard Yinsan Bit Holder

Multiboard Yinsan_Bit_Holder.stl

A remix of the Wera 8009 Holder for IKEA Skadis by pixelwave ([Printables](https://www.printables.com/model/371831-wera-8009-holder-for-ikea-skadis)) that can be mounted to the Multiboard.

**Differences of the remix compared to the original**
I've removed the original Hooks and added the Push-Fit mount for the multiboard.

A multiboard compatible, simple, holder for the Wera 8009 (Set 2, should work with the other sets).

I've printed mine out of PLA with a 0.6mm nozzle at 0.3mm layer height without any supports.

Multiboard Wera 8009 Zyklop Pocket Holder

Multiboard Wera 8009 Zyklop Pocket Holder.stl

A remix of the Skadis Wera Tool-Check PLUS Holder by Poly_Optimize ([Printables](https://www.printables.com/model/533707-skadis-wera-tool-check-plus)) that can be mounted to the Multiboard by Jonathan from Keep Making.

**Differences of the remix compared to the original**
I've split the original model into two separate parts and added the Push-Fit mounts  for the multiboard to each of them.

A multiboard compatible, simple, holder for the Wera Tool-Check PLUS.

I've printed mine out of PLA with a 0.6mm nozzle at 0.3mm layer height without any supports.



Multiboard Wera Tool-Check PLUS Holder

Multiboard Wera Tool-Check PLUS Holder.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

phga

Achievements

Voyager

Seedling

Debutant