This is an adapter for the common garden hose with Gardena connection.

I created it to easily empty and fill my inflatable pool. There are other similar models online but they are harder to print because they are more designed like a filter for a water tank. This model prints much easier because of the bigger holes on the side.

The model comes in two sizes small and normal, depending on your needs. The model prints in PLA. If you want more durability I would recommend PETG.

After printing just add a sealing ring and the adapter is ready to go.

**Print Settings**

- Printer: Creality Ender 3 V2
- Rafts & Supports: No
- Resolution: 0.2 / 0.28
- Infill: 100%
- Filament brand: 3DJake
- Filament material: PAL or PETG
- Notes: Line Width / Perimeters 0.6

Pool-Helper

Pool_Helper.stl

This is a custom mount for a Offgridtec 20W solar panel. I designed this mount because I wanted to mount the panel in a 30° angle in my front yard.

The design is optimized for the [Offgridtec panel](https://www.amazon.de/gp/product/B07M6KT7VQ/) but can be easily remixed to fit on other panels too. 

Using PETG or a similar material is highly recommended to achieve enough strength and UV resistance in the mounts. 

Print the mounts on the side to preventing supports.

After printing, align the mounts to the side of the panel and drill 4 holes into the aluminium frame of the panel. Secure the mount with M5 screws to the panel. 

**Print Settings**
- Printer: Creality Ender 2 Pro
- Rafts & Supports: No
- Resolution: 0.28
- Infill: 100%
- Filament brand: 3DJake
- Filament material: PETG

Solar-Panel-Mount

This is a custom mount for a Offgridtec 20W solar panel. I designed this mount because I wanted to mount the panel in a 30° angle in my front yard.

The design is optimized for the [Offgridtec panel](https://www.amazon.de/gp/product/B07M6KT7VQ/) but can be easily remixed to fit on other panels too. 

Using PETG or a similar material is highly recommended to achieve enough strength and UV resistance in the mounts. 

Print the mounts on the side to preventing supports.

After printing, align the mounts to the side of the panel and drill 4 holes into the aluminium frame of the panel. Secure the mount with M5 screws to the panel. 

**Print Settings**
Printer: Creality Ender 2 Pro
Rafts & Supports: No
Resolution: 0.28
Infill: 100%
Filament brand: 3DJake
Filament material: PETG

This is a simple screw mount for IP67 LED strips. I designed it for my SK6812 IP67 60  RGBW strip to mount it at my garden cottage.

The screw holes are designed for 4x30 mm screws but a smaller size should work as well. The width of the mount is about 10 mm and fits perfect between the LED's of a 60 LED's per meter strip.

**Print Settings**

- Printer brand: Creality
- Printer: Ender 3
- Rafts: No
- Supports: No
- Resolution: 0.2
- Infill: 100%
- Filament brand: 3DJake
- Filament color: Black
- Filament material: PLA

IP67-LED-STRIP-CLIP.stl

This is a simple screw mount for IP67 LED strips. I designed it for my SK6812 IP67 60  RGBW strip to mount it at my garden cottage.

The screw holes are designed for 4x30 mm screws but a smaller size should work as well. The width of the mount is about 10 mm and fits perfect between the LED's of a 60 LED's per meter strip

**Print Settings**

- Printer brand: Creality
- Printer: Ender 3
- Rafts: No
- Supports: No
- Resolution: 0.2
- Infill: 100%
- Filament brand: 3DJake
- Filament color: Black
- Filament material: PLA

This is a case for the [Official Printed Circuit Board for Luciferin](https://github.com/sblantipodi/firefly_luciferin/wiki/Ready-to-print-PCB "GitHub repository").

The case can be used in WiFi or USB installations and supports the regular ESP8266 and the Tiny Pico upgrade board for ESP32 variants.

The case comes in two variants: 
- Desktop version (DV; without mounting flaps)
- Regular version (incl. mounting flaps for horizontal mounting)

The lid is universal and fits on both variants. 

Print the lid upside down with a support blocker at the logo to get a clean nice looking logo.

Print details:

- Material: PLA
- Infill: 20%
- Layer height: 0.2mm
- Supports: Yes

Luciferin Case

Luciferin_Case_Body_1.3.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

pbl0m

Pool-Helper

Solar-Panel-Mount

IP67-LED-STRIP-CLIP.stl

Luciferin Case