Mini Ring for Dummy 13

i made this mini boxing Ring for my dummie 13, its a little small in the XY (220x220mm) but they're not really fighting soo... i build that size so i can print all parts in my Ender 3 V3 KE without cuts our gluing, but I think with small changes it can be made more at scale

i've printed ir with PETG and ABS, but i guess any material should do, ABS you may have issues (as i did) with the dimensions because of shrinkage, but with some material configuration that should be fixable

The one corner pad on the photo ended up unfinished because of print problem i had at a 80% print, but the part still ended up working well, I'm also going to reprint them in different colors later so no worries...

the model is pretty simple to print and assemble, you will need: Parts:

• 1 floor
• 1 base
• 4 corners
• 4 poles
• 4 ropes

Assembly:

• Align the base and the floor and put 3 poles at the holes.

• Add the 4 ropes pieces on the slots and the rise a little the poles and squeeze the forth one in place with the ropes already directed into the slot, then put them in place again (if some problems with the dimensions of the floor holes or the rope being too big to put on the pole in the spot, you may want to try printing with xy hole compensation the floor and base or with xy size compensation for the ropes)

• just finish fitting the corner pads on each corner

• or you could also just assemble all the ropes, poles and corner pieces first and then fit all poles in the roles at the same time

hope you enjoy my creation, any suggestion just leave a message and remixes can be done no problem (I'm even thinking about making the floor part with some roles for the DUMMY 13 - Acrobatics pedestal) i if you want to modify the model, here is the link for the Onshape project here have fun!