Kyra
Kyra

"Vampire: The Masquerade" compatible 10-sided die

by
nonchip
nonchip
Follow
"Vampire: The Masquerade" compatible 10-sided die 3d model
"Vampire: The Masquerade" compatible 10-sided die 3d model
2D
3D
Makes
Be the first to upload a Make

"Vampire: The Masquerade" compatible 10-sided die

can be used specifically for VTM / other World Of Darkness games, but also as a generic D10:

  • Filled Pentagram is "critical success"
  • "Corner-only" Pentagram is "success"
  • (nothing is "failure")
  • "Center-only" Pentagon is "bestial fail" (either ignore or fill in for non-Hunger dice)
  • additionally contains the digits 0-9, if you need a flat surface (eg for open-top casting) i suggest to leave the 0 blank.

caveat: this last feature means the digits and "vtm results" do not align as suggested by White Wolf (which specify "a D10 roll >= 6 is a success, a 10 is a crit, a 1 is bestial"). the faces are still the same as on a vampire hunger die and a d10, but "rotated" in between those "modes". this has no practical impact unless you insist on the strict use of "success" and "6 or above" interchangeably. this problem also exists on official vtm5 dice, with for example 3 and 7 being success and fail respectively (assuming 1 to be the skull)

the die is a 20mm tall, 45degree "tip angle" pentagonal trapezohedron with crisp edges, the symbols are inset by 0.5mm.


7 Likes10 DownloadsFebruary 28, 2024