These blank Gridfinity blocks are to help you create your own #Gridfinity pieces. They use the original geometry - The curves are all accurate and should match the rest of your Gridfinity set!


Currently in the mix:
1x1 Block
1x2 Block
1x3 Block
1x4 Block
2x2 Block
2x3 Block
2x4 Block
3x3 Block


All blocks are 1.25" from base to max height.
All M3 screw holes are 1cm deep from the base.






**Gridfinity Tips from Zack Freedman!**





- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Blank Blocks

1x1 Block 1.25in.stl

1x2 Block 1.25in.stl

1x3 Block 1.25in.stl

1x4 Block 1.25in.stl

2x2 Block 1.25in.stl

2x3 Block 1.25in.stl

2x4 Block 1.25in.stl

3x3 Block 1.25in.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

nolanleot

Gridfinity Blank Blocks