Metroid (NES) Yellow Lable - HueForge/Wall Art

Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

The Model is 115x115.74mm in size

You may print at higher layer heights below the Min Depth of 0.5mm

The Max Depth is 2.3mm and the Actual Depth is 1.7mm

This print uses 3 unique filaments

Swap Instructions:

   Start with Black

   At layer #5 (0.6mm) swap to Red

   At layer #9 (1mm) swap to Yellow for the rest.