Bucky O'Hare (NES) - HueForge / Wall Art

Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

You may print at higher layer heights below the Min Depth of 0.5mm The Max Depth is 2.3mm and the Actual Depth is 1.9mm

Swap Instructions:    Start with Black    At layer #6 (0.7mm) swap to Red    At layer #10 (1.1mm) swap to Yellow    At layer #15 (1.6mm) swap to Jade White for the rest.