This is an ender 3 max adaptor mount for my x rails. I used MGN9H and mount it on top for the bracket, I use the ender 3 v2 mounting bracket 

Ender 3 max X carriage Linear rails

Ender 3 max X carriage MGN9H Mount.stl

I've made this to mount my Ender 3 Max Psu Under bed. This mod is perfect for those who have Dual z lead screw. 

You can use any Psu Silencer for this mod.

For the PSU power in I use this one
https://www.thingiverse.com/thing:4962324/files

NOTE. This is a first iteration. Its a little bit hard to mount but it will do its job.

You'll only need 3pcs M3x6 and 3 pcs tnuts 

Ender 3 Max PSU Under bed Relocation

Base Cover.stl

Ever since I saw the Creality Sprite pro Extruder I believe its PERFECT for a corexy printers . Here is my work in progress mount on my ender 6. I tested it and its working great!

Here is a video of it printing
https://youtu.be/VuCKqtAE8nI

I believe It can be improve greatly with people having great 3d design skills than me. I'm Looking forward for others' improvement specially the wiring.

Also I  did this mount on sketchup so If you need the raw file for improvement feel free to contact me.

WHAT YOU NEED:

Creality Sprite Pro (without the custom wires)

4 pcs 2 pin 1.2mm Jst female connector

1pc 4pin 1.2mm jst female connector for the extruder

1 pcs 2pin 2.0mm jst female connector - heater cartridge wire

4pc m3x8 bolts

Extruder wire extension

Depending on the extruder wire youve got from creality here is the color combination for the connector to the breakboard. (Please refer to the Extruder wire photo , please ingore the female jst connector color)

[black red blue orange] = extruder connectror ender 6 Breakout board from left pin to right pin

X,Y offset for Cr touch

X= 34.5

Y=0

Estep= 424.9 ( from creality you need to adjust accordingly)

IMPORTANT NOTE

As this is not yet perfect here are some important notes

-I needed to shave off 1mm off the Cr touch to make everything flushed to the x gantry

-You need to move the Y endstop back using this:

   W/o top cover

   https://www.thingiverse.com/thing:5205878

   With Creality Top Cover

   https://www.thingiverse.com/thing:5222477

-Also the filament tensioner is covered so you might have to drill a hole if you want its functionality 

PRINTER SETTINGS

0.2 layer height

100% infill

Filament- I use ASA but you can use PETG or ABS

Just add a custom support on the CR touch mount

Ender 6 Sprite Pro Mount

Sprite extruder mount.stl

Dual Z Stepper Motor Jig.  I use this to mount my 2nd stepper motor for my dual z mod

Just snap then screw your 2nd Z stepper motor. its the same height as the z stepper motor

Ender 3 Max Dual Z Stepper Motor Jig

Dual Z Stepper Motor Jig.  I use this to mount for mounting my 2nd stepper motor for my dual z mod

Just snap then screw your 2nd Z stepper motor. its the same height as the z stepper motor

Stepper Motor Jig.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

moryuthers

Achievements

Seedling

Explorer

Debutant

Ender 3 max X carriage Linear rails

Ender 3 Max PSU Under bed Relocation

Ender 6 Sprite Pro Mount

Ender 3 Max Dual Z Stepper Motor Jig