Large Aquaponics Hydroponics tower 210mm 4" net pot and 2" net pot

This is all my files to print your own tower, you will need a 350mmx350mm bed to print these as these are large. I recommend a .8mm or 1mm nozzle cuts down on print time and adds strength. Besides the files you will need some 8mm bolts or eye hooks depending if you plan to hang this tower, also some pipe like the pvc I used to mount this into a a planter pot. All the fitting sizes I used are designed to be 3/4" but if you want I can change that size for you or if want to modify my designs I am more than willing to share Freecad files with those that purchased this. Feel free to message me with any questions.

List of files Tower top outside fill Tower top inside fill 2" net pot 5 qty module 2" net pot 7 qty module 4" net pot 3 qty section Bottom funnel drain Bottom flat ring Bottom pipe ring this is set for 1/2" pipe like the PVC i used in the pics.