The Multiboard Free-Standing Foot, but with a Desk Clamp underneath and above it, to be placed on a side of a table. You can have the board standing above and hanging below the table/desk! If you need any additional gap sizes, do comment below or DM me.

There is a single sided version where you can only put the boards above/below the table/desk, it should be slightly stronger/more durable. The thangs link is here: https://thangs.com/designer/minionteamsg/3d-model/Multiboard%20Free-Standing%20Foot%20with%20Single%20Desk%2FTable%20Clamp-1077481?source=All+Files




**…..-----===== FROM ORIGINAL MODEL PAGE =====-----…..**

Attach a “free-standing foot” to your Multiboard so it stands by itself, and use it as a desk organizer.

The free-standing foot comes with two pieces: the foot and the support piece.

To set it up, you insert the foot into a hole on the bottom of your Multiboard, then you place the support piece inside the foot to secure it into place.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io

Multiboard Free-Standing Foot with Double Desk/Table Clamp

19mm, Double Clamp - Multiboard Free Standing Desk Clamp.stl

The Multiboard Free-Standing Foot, but with a Desk Clamp underneath it, to be placed on a side of a table. If you need any additional gap sizes, do comment below or DM me.

There is a double sided version where you can put the boards both above and below the table/desk. The thangs link is here: https://thangs.com/designer/minionteamsg/3d-model/Multiboard%20Free-Standing%20Foot%20with%20Double%20Desk%2FTable%20Clamp-1077489




**…..-----===== FROM ORIGINAL MODEL PAGE =====-----…..**

Attach a “free-standing foot” to your Multiboard so it stands by itself, and use it as a desk organizer.

The free-standing foot comes with two pieces: the foot and the support piece.

To set it up, you insert the foot into a hole on the bottom of your Multiboard, then you place the support piece inside the foot to secure it into place.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io

Multiboard Free-Standing Foot with Single Desk/Table Clamp

19mm, Single Clamp - Multiboard Free Standing Desk Clamp.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

minionteamsg

Achievements

Seedling

Trailblazer

Up and Coming

Multiboard Free-Standing Foot with Double Desk/Table Clamp

Multiboard Free-Standing Foot with Single Desk/Table Clamp