I needed a hanger / holder for my new Makita Driver (Model: XDT16Z). Others that I found online were either too loose or too small.

Hope this helps someone who needs a little shop organization.

If you want to see the driver on amazon, here is a link: https://www.amazon.com/gp/product/B07N9JBDK5?ie=UTF8&th=1&linkCode=sl1&tag=mbueche-20&linkId=04f86e43fb9dc987460306ff5300f0e7&language=en_US&ref_=as_li_ss_tl

Notes: I recommend using PETG as its more durable and water resistant than PLA and gives beautiful results. If all you have is PLA, that, I am sure will work, too. I printed these both at 0.3mm DRAFT and 0.2mm Detail and both came out great. It's just a tool holder, so 0.3mm DRAFT is WAY faster.

No supports are needed with this model if you print it "standing up" as shown in the STL preview.

Here is a link to the filament I used. It was NOT a perfect match for Makita blue, but it was pretty close: https://www.amazon.com/gp/product/B082PFVWS1?ie=UTF8&psc=1&linkCode=sl1&tag=mbueche-20&linkId=a1fb25b499f65306e8cd233a0f01429b&language=en_US&ref_=as_li_ss_tl