tracking pixel
Michael D

Pro Acryl Mutliboard Paint Storage

by
mdelawter
Follow
Follow
Remix Model
mdelawter
mdelawter
|
Image 1 of 4
Pro Acryl Mutliboard Paint Storage 3d model
mdelawter
mdelawter
|
Image 1 of 4
Pro Acryl Mutliboard Paint Storage 3d model
2D
3D
Makes
Pro Acryl Mutliboard Paint Storage 3d model
Pro Acryl Mutliboard Paint Storage 3d model
Pro Acryl Mutliboard Paint Storage 3d model
Pro Acryl Mutliboard Paint Storage 3d model

Designed for use with an 8x8 multiboard tile, these light weight, low filament usage storage racks for Pro Acryl 22mm paint bottles will allow you to store 20 bottles per row on a 3x3 connected grid.

To even out bottle distribution, you will need to stagger each row with a 7, 6, 7 pattern with the STL files to allow for proper spacing between the bottles. If you try to use a 7 in all three spots, it will be too crowded. Or, you could op to use the 6 model only, and have 18 bottles per row instead.

The files are already oriented for print, and do not require supports. They utilize the multiboard push to fit posts and can be use with any of the snaps.

This has been completely designed by me and is free for use and remix by the community.


5 Likes13 DownloadsOctober 3, 2024



5 Likes13 DownloadsOctober 3, 2024

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density15 %
SupportsNone
BrimNo
Nozzle size0.4 mm