Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4871209. Modified/split the SVG file from https://freesvg.org/australias-continent Which was published in the public domain. I didn't test print this version. I split the paths (by color), and imported separately into TinkercCAD (scaled to 5%), setting each one to a different height. And used Inkscape to modify the main continent to remove some of the border islands, that would be disconnected (short of adding a base underneath to connect everything). You can use a plug in for Cura (or other slicer) to set a filament change when the layers start. Assumes a layer height of 0.2mm, with a first layer height of 0.3mm. Start with blue. Change to white at layer 3, Change to red layer 5. If you adjust the Z scale (to make the map thicker), you'll need to adjust the filament color changes accordingly. Resolution: 0.2mm, initial layer height 0.3mm 300% scale on Z-axis. Height is now 3.9mm. Start with blue. Change to white at layer 8, Change to red at layer 14. 200% scale on z-axis. Height is 2.6mm Start with blue Change to white at layer 6. Change to red at layer 10. Resolution: 0.1mm, initial layer height 0.3mm 300% scale on Z-axis. Height is now 3.9mm. Start with blue. Change to white at layer 14, Change to red at layer 26. 200% scale on z-axis. Height is 2.6mm Start with blue Change to white at layer 9. Change to red at layer 17.