Trump Mugshot - made w/ HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA Sunlu Orange Transmission Distance: 2.7 PLA Sunlu White Transmission Distance: 5.8

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Gray At layer #19 (1.6mm) swap to Orange At layer #21 (1.76mm) swap to White for the rest.