Gridfinity-compatible bins for holding GSI-Creos Gundam markers. There are 4 bins:

• one for holding the 6 packs of alcohol markers such as the SEED or Zeon set
• one for holding the pour-type marker set.
• one for holding the Metallic marker sets
• one for holding the real-touch marker sets

The holes are offset diagonally, and each row is offset to give a 10mm height different to aid access. The holes for the wider markers are 14.5mm, and for the thinner markers are 11.5mm, both provide plenty of clearance.

Also included is a small paint palette that will fit into the small crevice at the front - I advise printing this in white PLA. You can then use this as a quick reference should you wish.

I printed these using Elegoo Black PLA and Sunlu Purple PLA with 10% Cubic infill, brims to help prevent warping, 200C, 0.24mm layer height.

If you'd like to generate some of your own, please take a look at my OnShape parametric Gridfinity generator - these were created with V7.

These models only include magnet holes, not screw holes.