This snap-in access door is just simply better than the commercially available screw-in versions. The door is removable and can be Installed in any orientation. Not only does that mean you can change the orientation after it is installed, but you can easily remove the door when working through the opening. This model includes a collar to cover the edges of the cut wall for a cleaner installation and appearance. A back-side collar locks the front onto the wall without screws (but it can be screwed in as well if you choose). The two halves sandwich the wall with a ratchet-style click mechanism every 1/8” (3.2mm) to accommodate all common wall boards from 3/8” to 3/4”. A spring system on the Back Collar allows for a firm grip and adjusts for variations in wall thickness due to paint, paper, plaster, etcetera. Screws can also be used if desired.

The Snap-In Acces Door has a “lockable” latch to prevent accidental opening. And, the entire assembly snaps together without tools. Not to mention, you can print it at home!

This version provides an access opening of approximately 200mm x 200mm (8” x 8”) square. Cut a (205mm) 8-1/8” square opening in your wall.

I have also posted a smaller 6" version which is available here... https://than.gs/m/1162618

100% printed - no hardware, fasteners, or adhesives required. No additional support is required.

Print Settings:

Material = PLA or PETG, any material should work.
Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Top and Bottom Layer Count = 5 Infill = 40% Cubic Ironing = Not required Brim = No Support = The required support is built into the design.

Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.

See my blog for more details and other product info… https://www.logicalplanet.com/