This is a small and sleek snap-together pocket pill case that can deliver a single pill on demand. Works super well.

The pill box will accommodate pills up to 12mm in diameter and up to 7mm in thickness. Smaller pills and tablets also seem to work fine. But you might have to shake the case slightly to get just one pill if they are small.

It is designed for one-handed operation. And, it is 100% printed - no hardware, fasteners, or adhesives required. No support required

I have tried to make the “trigger” and slide to deliver the pill “child-proof” to some extent. To slide open the delivery tray you must first push it inward slightly and then slide it sideways to deliver a pill.

The lid simply snaps on and off for refilling the pills. And, I added a keyring hole in case it made sense to attach it to something. The key ring hole also protects the slide tray.

I recommend printing the top in clear PETG and that allows you to see into the case. The base and the pill slide can be solid or transparent. Or print several of them in different colours to colour code your pills.

Recommended Print Settings:

• Material = I recommend PETG but anything will likely work fine.
• Nozzle = 0.4mm
• Layer height = 0.2mm
• Line width = 0.4mm
• Wall count = 4 (1.6mm)
• Infill = 40%, but not important.
• Ironing = ON
• Suport = No.

Commercial Licensing is available through my Thangs Memberships.

For more images, details, instructions and printing settings visit…. https://logicalplanet.com/