This is a small device that will secure up to 4 USB/charger cables and allow you to attach it to something making it more difficult for someone to remove your USB cable(s). This model I am calling a theft deterrent as it does not actually “lock” but rather creates a barrier to theft and a perception of security. I am working on another model that will be properly lockable.
There are two versions of this model…. one that requires no tools to open (it has a protruding push-button to open the clasp) and the other marked “HS” (“higher security”) which has an inset pushbutton which is a) not obvious to find and b) requires a small object to press inward.
Both models have a “lock” setting that you can use to prevent accidental opening. Turn the lock setting dial to either Lock or Unlock positions.
I will make a video in the next few days about this design. Please check back for that.
100% printed - no hardware, fasteners, or adhesives required. No additional support is required.
Free for a limited time. Please collect it, like it and download it now to help support me in the league competitions. Thank you.
Print Settings:
Material = I recommend PETG because it has some flex and will withstand a little more abuse in this context. However, any material should work.
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Infill = 40%
Ironing = ON Everywhere
Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.
I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues I enjoy trying to help resolve those challenges. I welcome requests, suggestions and ideas to help make this and all my products better. Please send me a message any time.
See my blog for more details and other product info… https://www.logicalplanet.com/