Any fan of pro cycling or late-30's European history will tell you: Two balls are better than one. Double your fun with this special tile for Hextraction, the hackable, 3D printable board game.
When a ball passes through the jagged trigger area, roll another ball down the ramp. It's simple but surprisingly powerful, and part of my recommended "starter kit."
Print one or more tiles and snap off the built-in supports, and don't forget to print the rules card!
Fusion 360 source: https://a360.co/44Vb5Im
All of my Hextraction tiles have a built-in sacrificial support under each notch - remember to snap it off after printing. Enable the brim if these detach from the bed.
Hextraction is a 3D-printable, modder-friendly board game designed by me, Zack Freedman of Voidstar Lab. In addition to tiles, you'll also need 10mm steel balls or 3/8" slingshot ammo and a game board. To learn the rules and how to get started, watch the Hextraction video!
Hextraction is absolutely free - it's free of charge - all of my models are here on Thangs, commercial use allowed. It's free-form - you can play with any number of opponents, even zero. It's free to modify - you can create your own tiles and configure your own board.
For more information, visit https://playhextraction.com.