Mini Clutch for 180mm x 180mm build size

This is for the most adorable little mini clutch you may ever see. It's printed in about 2 hours, and you'll just need some mesh fabric, 6 magnets that are 10mm x 2mm and a little bit of glue. The guide that's included has all the links and info you'll need to create this wonderful little ID and cash holder. You can see the size difference in the included photo.

There are two versions -

Version 1 with holes that are designed to fit the Chicago style screw fastener listed below (https://a.co/d/eJTBKzu)

Version 2 has no holes, so it is just a mini clutch to carry or put in your larger clutch/bag

This is printed at .24mm layer height. There is a pause command inserted at layer 2 to add the fabric, and another pause at layer 14 to add 6 magnets that are 10mm x 2mm, all facing the same orientation.

This is intended to be printed face down on a build sheet that offers some effect, but the textured effect can be just as cool. I like using tri color silk PLA with these, with the bottom layer as octogram spiral - Change the bottom layer pattern to get a different effect! My favorites are octagram spiral and archimidean chords

The included video is referencing the larger clutch, but is the same concept.