Now Released and more game surfaces to follow!
The goal of slingpuck is to be the first to shoot all your pucks into your opponent's camp! A simple 2 player game.
How to play
Rules:
- Each player puts 5 pucks on their side.
- The game is played with one hand.
- Use the elastic to fire the pucks to the other side of the board.
- Only one puck is moved at a time.
- Slide both ends of the elastic band into the side grooves so that they snap into place.
- As soon as the game starts, there is no pause allowed.
- Whoever clears the board first is wins. Important Rules;
When the game starts, the puck cannot be moved to clear the way of pucks If a puck should fly out of the board, the game doesn’t pause and the player must go pick it up by himself. Suggested print settings:
3 walls 10% infill 4 Top/Bottom layers (ironing is optional) supports are optional for the puck gate if you dont trust your bridging Materials:
One piece of 1.75mm to join the boards together 12 3x2mm magnets 300-350mm of 2.5-3mm elastic cord Changes:
added a rounded edge /w build in layers for easier coloring/painting on the STL file as well as BL 3mf file for easier access to the attached step files inside!