Wildman 2L Battery Holder for Mi Pro 2 and M365 E-Scooters

A convenient battery holder for your M365 or Mi Pro 2 E-Scooter. It is compatible with the holes on the embedden.com kits and can serve as a replacement for a damaged battery holder. It does not slide up and down or move sideways when mounted correctly (the "horns" go towards the ground).

Bill of Materials

1. Wildman 2L Scooter Bag
2. Printed parts
3. 6x M3 Flathead Screw (min length 12 mm, more also fits)
4. 6x M3 Washer (9 mm or more outer diameter)
5. 6x M3 Hex Nut
6. 2x M4x18 Hex Screw
7. 2x M4x8x6 threaded insert (that is 8 mm length, 6 mm wide)
8. (Optional) silicone adhesive
9. (Optional) Felt glider

Assembly instructions

1. Print Main and Bracket STL files. PLA with 0.08 mm layer height results in optimal aerodynamics.
2. Prepare Wildman 2L Bag: Remove straps on the top side by cutting the seam, on the underside remove with scissors (will not be visible) and remove net inlay by cutting it off with scissors, so bag can be opened wide enough.
3. Cut 6 holes into bag to fit the holes on the underside of the main body.
4. Attach bag to main body using 6x M3 Flathead Screw, Washer and Hex Nut.
5. Optionally seal with silicone to make watertight.
6. Optionally put felt glider over screws for vibration dampening
7. Attach to e-scooter with bracket and 2x M4 screws. A ball hex driver is very useful for zero-frustration mounting.

License CC0 1.0 (https://creativecommons.org/publicdomain/zero/1.0/deed.de) - Do whatever you like. There is a Solidworks file if you want to customize it. Commercial use allowed. Yes, you can print it and sell it. Make sure to add your logo to the side.